Search results

  1. cranetruck

    Peter Bog's CAD deuce schematic!

    Travis, the turn signal bulb is grounded via the hose clamp to the steering wheel column, it is not a failure of the turn signal flasher unit if it doesn't turn on, it may simply not be grounded. There may or may not be a CB in the flame heater circuit. Wire #55 comes from the accessory...
  2. cranetruck

    Peter Bog's CAD deuce schematic!

    Here you go, military numbers for headlight and BO driving light only, AFAIK.
  3. cranetruck

    Peter Bog's CAD deuce schematic!

    I'd like to see the simplified version of the light switch as shown below and separate the ground at the instrument panel to show that the instruments are together grounded via the 1/4 turn fasternes to "chassis". The bulb info below would be useful... The fuel level sending unit is grounded...
  4. cranetruck

    Peter Bog's CAD deuce schematic!

    The light switch wiring from an m656 TM.
  5. cranetruck

    Peter Bog's CAD deuce schematic!

    Travis, the light switch CB is within the switch housing......it's rated 20 amps and the dimmer resistor is 30 ohms. Thanks for working on it, although I'm personally perfectly happy with the TM wiring diagrams, with all the variations from year to year. Some features like an oil pressure...
  6. cranetruck

    Peter Bog's CAD deuce schematic!

    I did, Patrick and started a new thread on all the mistakes I found...let me see if I can find the post.... http://steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=16484&highlight=cad+errors
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks