Search results

  1. C

    MEP-802a: need aux fuel tank 20 gallon preferred but 10 would probably work

    The one concern I would have with running a genset unattended with no one onsite would be the potential for a fuel leak & subsequent fire. Diesel is certainly MUCH better than gasoline as far as combustibility/flammability but diesel squirting on a hot exhaust manifold is a problem. You...
  2. C

    IoTaWatt WiFi electricity monitor on MEP-803a

    Wow thanks for posting that! That is a VERY useful tool! I went to their website and see that you can configure & customize it with various open source add-ons. One example: "Uploads to influxDB and Emoncms More sophisticated users can configure data upload to influxDB and use Grafana or one...
  3. C

    Big 2 Cycle Generator?

    I thought it may have to do with identifying these sets location from a service standpoint being its on a watercraft of some sort. Typically sailors don't reference positions left or right when referring to objects shipboard like an engine. Was wondering if perhaps these might be used for one...
  4. C

    Big 2 Cycle Generator?

    Well its been a little slow on the SS website in the generator forum during the holidays so I thought I would post this as a curiosity item. While I was cruising around Craigslist Portland, OR I did a search for "Military Generator" and an ad popped up for 2 very large generators for use on...
  5. C

    MEP105A Gen Starts and dies

    Since you earlier said this about the check valve "There was a lot of rust and crappolla in it." I would blow out all the fuel lines while the injection pump is out for the rebuild if you haven't done so already. Not knowing how often it was brought into service at your municipality and how...
  6. C

    Glow plugs for MEP-002a/MEP-003a

    Edit: I see Zed254 already provided a link to these: Try eBay using: "GLOW PLUG, CHAMPION 182 CH42, MILITARY GENSET MEP002, MEP003". By the way, you indicated they are not functioning. Have you pulled them and inspected them and verified its actually the glow plugs themselves. Also, are the...
  7. C

    MEP 804 - Over Voltage

    Just a thought...sometimes those type of wiper switches get dirty/oxidized from lack of movement. With the unit turned OFF, I would mark where it was last set for 120 V and then fully exercise the switch fully stop-to-stop both directions several times and then return to the mark. Then restart...
  8. C

    MEP 002a Oil and Filter

    You can type in "MEP-002a Spin On Cartridge" on eBay and one will come up. Also, SS member Speddmon (his post above yours /\) has sold these in the past. You could PM him to see if he still offers them for sale. Edit: Or, look in the SS "Parts For Sale" forum to see if they might still be...
  9. C

    MEP-002 Output Voltage Problems

    Here are some more recent threads (MEP-003a with similar issues) and better troubleshooting advice included.
  10. C

    MEP-002 Output Voltage Problems

    As a start This thread and other similar thread links in it may help you troubleshoot the problem.
  11. C

    MEP002A no start

    Tip: You really shouldn't use starting fluid (ether) on a diesel with intake heaters and glow plugs. One runs the risk of damaging the engine by explosive detonation in the intake manifold or breaking piston rings or damaging the piston itself due to using starting fluid in a "compression...
  12. C

    When starting my 002 the wiring harness from the control panel to switch box melted down from some type of short?

    Not directly related to your problem...however since you have 3 MEP-002a's you should verify they have this wiring mod as it relates to the starter:
  13. C

    Steel Soldiers migration 12/9/19

    How do I insert a "PDF" attachment to a post? Tried using Insert (media) no go, tried using Image insert, no go. Its not a URL if its a PDF file sitting on my PC. This is one of the old Military issued maintenance tips (forgot the name of the military magazine that was used to issue tech type...
  14. C


    I had a similar experience on my MEP-002a with AC voltage going high and then returning to normal. It turned out to be a broken winding wire in one of the transformers inside the control box. Off the top of my head I can't remember exactly which one it was but it was either the T1 or T2...
  15. C

    Steel Soldiers migration 12/9/19

    Not sure if this is related to the issue you are describing,,, you can edit out irrelevant portions of any quoted text when replying to any post, or you can edit it until there is nothing showing from original quote. Kind of a work-around, I think, to what your describing.
  16. C

    MEP 362

    That's what I was thinking looking at the picture...very cool! Definitely needs a video once he gets it running to hear it sing!
  17. C

    Steel Soldiers migration 12/9/19

    When I go to the Generators forum the "Sticky's" are just stacked on top of the most recent threads. Seems like the Sticky's need to be roped off with a border or something so it is set apart from current threads. I'm guessing we lost our Rank in favor of Trophies? Other than that, it looks...
  18. C

    MEP 362

    Not familiar with this unit, what type of engine powers it? Looks interesting! Would like to see a video once its running. Good luck with its return to service!
  19. C

    Need MEP-002a Wiring Harness & Generator Stator or Complete 5 kW Generator Head

    If you can take some photos of them & provide a year of mfg. if available, I might be interested. The Gen head itself mainly has to have a good stator along with its integrated wiring harness. Not sure how to check the stator, there's probably a procedure in a TM. The genhead on the 1991 I...
  20. C

    Another MEP-802 standby generator thread

    Nice work & looking good!
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks