Search results

  1. rtk

    35A3 CTIS parts

    Cleaning out the storage trailer and found some A3 parts . I have a complete NOS air manifold and harness for the A3 CTIS system , I also found a box of flex vent hose for the air assist steering , runs from the valve to the firewall , I also have the air compressor relief valve MWO Kit . all...
  2. rtk

    Need 1031 moved from UP Michigan to Buffalo NY

    I have a M1031 Maintenance truck that needs to be moved from the Chassell Michigan 49916 to Lockport NY 14094 . Truck runs and drives , no issues , it is in storage for the winter . but can be moved anytime . My email is rtkjmk104@gmail.com . home phone 716 433 0614 . I am very flexible...
  3. rtk

    Military Vehicle Show and CruiseThr

    VFW Post 7275 Military Vehicle Show and Cruise The Renegades of WNY in cooperation with VFW Post 7275 will be holding a military vehicle show and cruise on Sat.August 26th and Sun.Aug 27th , 2017 located at the Lt.Col. Matt Urban VFW post 7275 , 3741 Walden Ave. Lancaster NY 14086 .Walden...
  4. rtk

    Winch from Buffalo to New Jersey

    I have a 24 volt electric winch that has found a NEW home in NJ . I am located in Buffalo off IS90 , can meet on the highway for dropoff , weighs about 125LBS . Someone going to NYC would work also , thanks in advance , Bob K
  5. rtk

    WWII Arc Light searchlight info needed

    A buddy and myself are in the process of restoring a WWII Arc Light . We are at the stage where we have the Genset running and are getting ready to power up the Arc Light . We are looking for ANY info/TM's on these old lights . They are a pretty sophisticated setup and LARGE !! The light is...
  6. rtk

    Thunder over Niagara

    Just got a request for MV's for the " Thunder Over Niagara" Air Show at the NFAFB being held on 17-18-19 July of 2015 . We are supposed to meet with the Base Commander in the next few weeks for details . We are trying to get use of a Hanger for our MV's display ,and a way to get on base early...
  7. rtk

    Check Your Belts !

    So in the process of of taking the A3 out of winter hibernation , I notice a REALLY loud noise coming from the front of the engine , I am thinking water pump , alternator , idler pulley ? So I start by taking off the serpentine belt and find the belt SPLIT down the middle I can't believe that...
  8. rtk

    PulseTech battery analyzer manual info

    Picked up a PulseTech MdX-490PT battery analyzer from GL and I am looking for a operating manual or any info on operating the unit . The battery service kit I picked up is brand new , never been used , only needed new batteries in the analyzer , but did not come with any paperwork . No wonder...
  9. rtk

    convoy lights

    I picked up a set of convoy lights for my Deuce and I have the TM's and info from this forum , and the only thing I am still need some help with is what size clamps will work with the mounting plates behind the cab and what bolt holes to use . I picked up some 3/8' X 2" U bolts from...
  10. rtk

    M274 Mule to western NY

    Looking get my Mule from North West Alabama ( Florence Area) to Buffalo NY . Time frame is open , but would like to get it before this winter sets in . I can meet transporter on the road if need be . PM me and I can fill in details . bob k
  11. rtk

    Wire gauge

    I picked up some slave ends for a jumper set , and what I am trying to find out is what gauge wire is used on the jumpers sets . I would like to use Welding cable if possible as it is more flexible . it seems either # 1 or 2 , or maybe 0 . Also what is the typical length of a set , as the sets...
  12. rtk

    TM for convoy lights

    Just picked up some convoy lights and I am trying to find a TM on the parts and installation on my Deuce . I think I have everything , even have the cables . I have a nice set of strobes for the poles , should work out good .:?
  13. rtk

    Marine Appreciation Day 7/13/2013 North Tonawanda NY

    These were taken today at Marine Appreciation Day at Fishermen's Park in NT, New York . The MV's are from the Empire State West group . The D7 dozer is a tribute to the Seabees' . We had a GOOD showing , 10 MV's , NO FLAME OUT's and nice weather , Good time was had by all . The Marines really...
  14. rtk

    Marine Appreciation Day 7/13/2013 North Tonawanda NY

    Empire State West will hold a rally and MV display on 7/13/2013 at Raymond Kilmek Veterans Park( Fisherman's Park) on River Road in the city of North Tonawanda . The event is Marine Appreciation Day . We be in the area next to the parking lot .
  15. rtk

    M37 Red Bumper

    I picked up a 1953 M37 , originally a AF STRATA BLUE MV . Some time in it's life it was painted OD . I am in the process of preping for a paint job , BLUE or OD , What do you think ? I noticed the front bumper was painted RED , what was the purpose of the red bumper if anyone knows . I can't...
  16. rtk

    LU-4 winch seals numbers

    Does anyone have seal numbers for the seals on the worm shaft ? I am in the procress of checking and overhauling my winch and need some seals . The gears and bushings look almost new , very little wear , freed up the declutching shaft , a few gaskets and seals and I should be in good shape ...
  17. rtk

    new 35A3 owner FYI

    Just took delivery of a M35A3 . Purchased form Jeff @ Motorsource inc. outside Chicago . I picked up a real nice Arizona MV , no rust ,and a very complete vehicle , even came with the operators manual . Very nice people to deal with . They even hooked me up with a great truck hauler , no...
  18. rtk

    rmi size for 101A2 trailer

    I am looking for a spare tire and wheel for my 101A2 trailer . What 8 lug wheel fits these trailer , they appear to be just your basic 8 lug steel wheel . I plan on going the Pic a Part route , just trying to nail down what to look for :-D
  19. rtk

    m101A2 flexible brake hose

    Does anyone have a crossover # for the brake flex hose over the axle ? I am in the process of overhauling the brake system and could use a new hose . I have the standard Kasel trailer , thanks Bob K8-)
  20. rtk

    M35A2 or A3 ?

    I am new to the forum and I am looking for some advice . I am currently finishing up restoration of my 1953 M37 W/W and after having been bitten by the OD BUG , I am looking for my next project . My question is what is the better MV to purchase , a M35A2 or A3 ? I have been looking at the pulses...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks