Search results

  1. fuzzytoaster

    TX 14.00r20 Tires

    I have 7 14.00r20 tires available for pick up or freight. 5 are Goodyear ranging between 80%-90% tread, dated 01'-11'. All held air and drove fine on the M929A2 they were on. 2 tires are Michelin XL, one is 80% tread with some cracking from low air and the other is junk from sitting flat but has...
  2. fuzzytoaster

    TX 1990 BMY M936A2

    You are looking at a military M936A2 5 ton wrecker made by BMY. The truck was overhauled in 2006 at RRAD and has 7,461 original miles (about 1200 since RRAD). It came from the 115th CSH (Combat Support Hospital) Battalion from Ft. Polk and was surplussed directly from the unit's yard instead of...
  3. fuzzytoaster

    TX NOS SEAT BELT KIT - M35 M813 M818 M923 M939

    I've got a few NOS seat belt kits still in the packaging, made in 2011. The kits cover MWO 9-2323-200-35-1 which was the last seat belt upgrade for the M35A2/A3 and fits other M series trucks with the same cab (M813, M818, M54A1/A2, etc). Each kit comes with a complete setup for a spring driver...
  4. fuzzytoaster

    TX Air Cleaner, Intake Housing 5ton M809/M939

    I've got 3 NOS air filter housing for the M809 & M939 series trucks. Each housing is still in the factory box with labels. Making a good Christmas deal to someone in the SS community. $100 shipped (Cont US). PM me, Paypal preferred. (click my name then "start conversation")
  5. fuzzytoaster

    TX Military Cargo Grab Handle Bar - M35 M813 M923 HMMWV FMTV

    I have a bunch of new production grab handles manufactured in 01/2012 in the US. They are made of steel, coated in green CARC, and ready for mounting on anything. Each handle is new in bubble wrap from the manufacturer, never opened from the shipping crate! Originally designed form mounting on...
  6. fuzzytoaster

    TX NEW VITON M35A2 Deuce Multifuel LDT LDS Injection Pump Hydraulic Head O Ring Kit

    You are looking at a new production Viton 3 o-ring set for the LDT and LDS multifuel engines. These o-rings are high quality, high temperature rated, and chemical resistant. If you are getting fuel in the crankcase, dripping oil, or they haven't been replaced since the Army assembled the pump...
  7. fuzzytoaster

    WTB: MTV Innershaft, Planetary, Hub Cover, etc..

    Looking for a "short" inner shaft from an MTV (middle right side axle). Also looking for a complete planetary setup, hub cover, and other small parts if anyone is parting out a truck.
  8. fuzzytoaster

    TX Cab Rifle Mounts

    I've got 9 rifle mounts like shown below. All freshly removed from LMTV cabs but can fit any other MV with a few bolts/mounts. $15/ea + shipping PM me, Paypal preferred. (click my name then "start conversation")
  9. fuzzytoaster

    LMTV Side Window Seals

    Looking for one or a source on seal/gasket for side windows on MTV/LMTV. I've only been able to find one place that carries the seal but is overseas and the gasket is $2/foot which seems costly for thin rubber rope.
  10. fuzzytoaster

    MRAP Buffalo Trainer

    For those who haven't heard I've come into possession of a Buffalo MRAP trainer built on an M925A2 chassis. I want this thread to document the unique nature of this machine and updates as I work on it (even if slowly). I felt this should go under the "Heavy Armor" category due to the extensive...
  11. fuzzytoaster

    Baton Rouge - M923 Batteries

    Is anyone near Baton Rouge that would be willing to get an M923A2 started? It will likely need the usual batteries and fuel prime to get it running. I plan to have it hauled but it needs to drive up onto the trailer. Thanks.
  12. fuzzytoaster

    WTB: Wrecker top bumper lift tool

    Looking for a pair of bumper lift tools for my M1089. Odd chunky metal things that don't fit much else.
  13. fuzzytoaster

    FMTV Allison 3070 Transmission - Code 4627 Overcurrent, A-High Solenoid Circuit

    The 1078 I recently acquired runs but wont go into gear. The PBC (push button controller - Wtec3) is giving me an active code for 46 27 - Overcurrent, A-High Solenoid Circuit. Clearing the code does not work, the condition is active and preventing engagement. The relays in the PDP click when...
  14. fuzzytoaster

    TX MTV/LMTV Boarding Ladders

    I've got a few MTV/LMTV ladders for sale of both styles: straight and angled feet. All are in good shape, the straight appear to be unused as I unwrapped them from the plastic. $150/ea + shipping PM me, Paypal preferred. (click my name then "start conversation")
  15. fuzzytoaster

    FLU-419 - Instrument Cluster In-op

    I've followed the TM and dug into the dash to identify this problem but no success yet. All electrical instrument gauges do no work with the exception of the high beam indicator and no charge light which are controlled by the power/ignition switch. The start relay under the hood had the starter...
  16. fuzzytoaster

    Behr Paint Code - Home Depot Update 2019

    This is a heads up to the MV community and those who use Home Depot to mix their military color paints. I was informed by the paint employee that Home Depot is migrating away from their dedicated computer program and will be using a web browser based program to mix paints starting this Fall...
  17. fuzzytoaster

    LMTV M1078A1R - Battery Disconnect Reset Issue

    I have a 2006 M1078A1R that is having an odd issue related to the battery disconnect box. This truck is current gen so no TM help. Batteries are fresh, wired correctly, and voltages checked. Turning the battery disconnect to "on" will result in a satisfying click for power. This click sounds...
  18. fuzzytoaster

    Lincoln, Nebraska - Inspection/Batteries

    I have an M1089 in Lincoln, NE that I'd like someone to go look over for me and prep for shipping. Put some batteries in it and make sure it can start to load itself. Anyone around there?
  19. fuzzytoaster

    HEMTT M977 - Crank, No Start

    No HEMTT section on the forum, no love for them yet? :p Anyway.. I'm in possession of an M977 that the previous owner had no desire to own or work on. I've been working on it all day and ended up in a crank no start situation that looks fuel related. I've got strong cranking but like I said no...
  20. fuzzytoaster

    LMTV/MTV A1 - Battery Cable Info

    Would someone who owns an A1 (not A1R) please post a photo of their battery cable layout. I recently acquired an A1 that was overhauled into an A1R and S&S seemed to have blended the two designs together making a mess. No batteries in the truck currently (get it..current) and no labels.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks