Search results

In Please

You will have to drill out the other side (currently undrilled) to be able to drive the pins out to allow rebuild. Once disassembled inspect and make sure no unusual gouges or nothing is broken. At this point either the Orings will be broke, or using a oring pick remove the orings and you will...

I would turn the air off completely to the air assist. Drive it and see if it still pulls, it may just be a tire, brake, tierod etc issue. If it doesnt pull you may have to rebuild the draglink, a oring may be cracked allowing air pressure to bleed by

Would it be possible to use actual springs in place of the airbags? I have access to and measured the ST180 Bush Whacker tail wheel springs and brackets. It is an easy conversion to this BUT with the constant spring pressure on hookup and unhooking the shelter will this cause an issue? ie...

Thanks

Yes 840

Im not familiar with airbags anyone know a source?

8x10 1,500 lbs space need to haul from southern Md to northeast Al?

Thanks, my only option I found is getting a "farm" tag. They wont allow a vintage tag on a 1999 model truck, it has to be 30-35 years old.

What are the types of tags that can be used for the M35A3? It's part of my collection, I dont have a farm, I'm not commercial. I was talking to a member years ago that purchased a one time tag for his collection but I cant remember what type he said. It wasn't a vintage vehicle tag, but thats...

In Thanks

I was thinking about just using a ball valve and that way I know when its open and when its closed.

For my understanding the return filter or strainer you mention is on the return line on top of the pump returning back to the tank? I want to go thru all the screens/strainers in the system when I change out the fuel filter and chk and clean the water seperator if needed. Thanks

Ive been reading up the the common check valve sticking issue. Is there any real danger to completely take it out? I know of it being done with no affect on any fuel drain back. Truck cranks easily anytime. Or is there another option to prevent the stick check valve issue? Elec fuel pump to...

IN

12' was too short for my hay/hauling, I got a 14' its not mounted to the frame yet. If I can lower it with bolster rims I am going to put a elec over hyd and use the rear axle brakes.

I just purchased a duece frame with rear axles and a 14' cargo bed. Im leaning towards keeping the duece axles under it and taking the gears and shafts out. This will be a dual purpose trailer for my 1 ton and m35a2. The height is an issue, could I put bolster rim and tires on it? Im guessing I...

Mine served in theater with the 135 MP. It had a murdock paint scheme at the time. It still has the shipping labels inside the drivers door.

Thanks, I was hopful for one commercially available like that.

4820014089958 is the nsn I could find. It says its 1/2 npft I was hoping to find a Napa or .... Cross number, they dont offer a fuel line check valve in a 1/2 thread size. That I could find