Search results

I'll give it a shot, but I would think I've created enough vibrations at this point🤣

Anyone have issues getting the joint to separate? I can't for the life of me get the radius arm and the cover to slide off. I've pickle forked it, hammered it, floor jack under the bolt, I'm running out of ideas at this point. I'd leave it alone but the dust boot is torn.

Pick me, pick me!

I bought a cheap Toughbook for the same reason! Add a cheap mouse (quicker than the touch pad and easier than the stylus and touch screen) and I have a pretty indestructible version of the TMs. At least until I can find the paper versions too!

Have you had any issues with the no lip tensioner? I ordered one, but it appears that it puts the pulley at a higher position (without the belt) than my lipped tensioner. Because of that I haven't installed it yet. I don't really want too much tension either, obviously.

Mine also has a lip, and although the tensioner itself would be fine, the nipple that goes into the hole in the bracket broke off. Is there an auto parts store equivalent or is it just buying NOS?

Got mine registered in Kingman. Had to get an inspection at the port and talked to GovPlanet titling again to have another form sent to me first. Bit of a hassle but if you keep pushing and asking questions you'll get it eventually. Ended up needing the sf97, bill of sale, the handwritten form...

My 200amp will spin down after I turn off the engine, but it's sounding like it's dragging for lack of a better term. I don't think that's normal (for me with this truck it has done it since I purchased it, but in thinking the bearings are going?)

IN

In!

IN

Good to know for when I add to my collection in the future! :)

I didn't know that... My HMMWV only has the six digit serial...

Can I ask through who? Everyone wants a 17 digit VIN...

Yep, took me almost 6 months to get mine, and then a bit longer to get the SF 97, only to SF find out my state needs a bill of sale!

Unfortunately that may have happened before I even bought the truck, judging from the sad state the hoses are in. I'm hoping it's still good, but don't want to keep the system connected right now. But even if I remove it completely I will still need caps to keep it (hopefully) clean once it is...

So I'm temporarily removing my Red Dot AC. Because it's only a temporary plan, I'm not going to remove the compressor. I've been trying to find out what size caps I need to get so that I can cap the compressor until such time as I put the AC back in. Do you happen to know what sizes? I've...

If it helps, the switch by the driver's door is a three position switch

So I recently purchased a former Marine Corps M1123 and from it's unit designation numbers it came from 9thComm BN. On the driver's side there is a switch that I have no idea what it does or goes to, and behind the passenger seat is what looks like a push button that again I don't know what it...

In