Search results

  1. C

    6.2 timing chain stretch or Fast idle switch causeing rough starts.

    If you can't wiggle it at all by hand the gasket is stuck. If you can move it by hand get a second helper or pry it over to where it needs to be and tighten it down. You should not need to loosen the injector lines.
  2. C

    6.2 timing chain stretch or Fast idle switch causeing rough starts.

    You might need to whack it with a dead blow to break the gasket loose
  3. C

    6.2 timing chain stretch or Fast idle switch causeing rough starts.

    Yep! Here on the site in the CUCV TM section. http://www.steelsoldiers.com/showthread.php?116775-GM-6-2-Liter-Diesel-Engine-Service-Manual-16015-05-1C
  4. C

    6.2 timing chain stretch or Fast idle switch causeing rough starts.

    Your timing is too retarded. Correct timing is NOT having the marks alligned. The pump mark should be offset to the drivers side. If you download "The 6.2 Liter diesel engine" GM training manual 16015.05-1C there is a nice illustration (4-166) on page 4-99 that shows that the correct...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks