Search results

  1. Beyond Biodiesel

    how to turn up fuel...in pictures?

    Thanks, I'll give it a try in a few weeks when I replace the filters and do an oil change on my pipeline deuce
  2. Beyond Biodiesel

    how to turn up fuel...in pictures?

    Hi folks I tried speeding up my deuce using an later thread that didn't have picture or much detailed instruction and ended up breaking the bolt that the FDC innerds attach to on a replacement injector pump. It is a newer version, probably the G series. I still have the old IP. So, does anyone...
  3. Beyond Biodiesel

    Deuce fuel line fittings

    Hi folks, I want to install a manual fuel shutoff valve on the fuel line of my M357 a2, so either a 1/2" reverse flare ball valve, or adapters to plumb it into my fuel line without having to cut the fuel line and install something would be great.
  4. Beyond Biodiesel

    M35A2 Parker Fuel Pump Install

    Thanks for the reply. My Parker fuel pump came with a bayonet connector, so I guess I'll buy a mating bayonet connector and connect it to the wires coming from the old M35A2 style connector and put that adapter into the fuel tank. The other option is I noticed that the Parker fuel pump has a...
  5. Beyond Biodiesel

    M35A2 Parker Fuel Pump Install

    Thanks for the great photos. I have a Parker pump I plan to put into my M756A2, but I don't get the electrical connection. It looks to me like you were able to switch the cable from the old Olympus pump to the Parker pump, which comes with a different electrical connector than the old deuce...
  6. Beyond Biodiesel

    M35A2 Parker Fuel Pump Install

    I got mine in the classifieds here, so post a request for a Parker fuel pump
  7. Beyond Biodiesel

    Rebuilding the Injection pump

    The injector pump was unused and included the booster pump, but I still observed rising levels in the crankcase.
  8. Beyond Biodiesel

    Rebuilding the Injection pump

    I've replaced the injector pump, which means the booster pump has been replaced, and the flame heater died, so it has been removed, but I don't see how it could be a source of fuel entering the crankcase.
  9. Beyond Biodiesel

    Rebuilding the Injection pump

    Thanks, Rusty, and others for this valuable thread. I have 2 questions regarding the injector pump, which might be off-topic for this thread. 1) I found the motor oil level in my deuce was rising, and I asked on another thread, and was told the probable cause was the hydraulic head (HH) had to...
  10. Beyond Biodiesel

    M35A2 Maintenance Maual for "Parking Brake"???

    Thanks. My flywheel is badly cracked, so the clutch replacement is on hold until I can track down a replacement flywheel
  11. Beyond Biodiesel

    Deuce clutch replacement

    Thanks, Rusty. I had a friend who is retired master mechanic examine it, and in his opinion there are many cracks, and some of them are quite deep, so it should be replaced. His assessment seems reasonable to me.
  12. Beyond Biodiesel

    Deuce clutch replacement

    I could not push or pry the clutch fingers down to insert a block of wood, so I just removed every other bolt, then I removed the rest of the bolts loosening them alternating across the clutch until I had them all out. I had the clutch assembly out on about a half hour. I found the...
  13. Beyond Biodiesel

    Deuce clutch replacement

    I finally got the transmission out of the way, and I am now staring at the clutch assembly. Does anyone have an idea what the dimensions should be for the "small wood blocks" that are used to wedge between the clutch fingers and the pressure plate housing?
  14. Beyond Biodiesel

    Deuce Transmission Removal Crossbar

    I finally got a friend to help me unbolt and remove the passenger bench seat, which allowed me to remove the third floor pan, which gave me access to the jackshaft, which I removed yesterday, which allowed me to use 2 come-alongs to wiggle the transmission out. It is now resting on a pallet...
  15. Beyond Biodiesel

    Deuce Transmission Removal Crossbar

    I did all of that weeks ago, and it is still too snug. It is possible that my M756A2 is too full of other stuff, like a rear winch, to allow for removing the transmission without taking something else out. PS: The transfer case is unbolted, but will not come out either.
  16. Beyond Biodiesel

    Deuce Transmission Removal Crossbar

    Sorry to have dragged the repair of my deuce's clutch. I had to focus the last 2 weeks upon repairing my daily driver. Yesterday I was able to get back to pulling the transmission out. I borrowed 2 more come-alongs. I attached one underneath the frame, and attached one end to a frame rail...
  17. Beyond Biodiesel

    Deuce Transmission Removal Crossbar

    Thanks, Big Z, downloaded it. Here is a link to TM9-2320-209-34-2-1
  18. Beyond Biodiesel

    Deuce Transmission Removal Crossbar

    I am now 3 6-hour days into pulling the transmission out of my M756A2, and cannot seem to budge the transmission. I of course have removed all of the bolts that I can find holding it to the engine, as well as all of the linkage, and the transfer case. I have the transmission rapped with...
  19. Beyond Biodiesel

    Clutch slipping, can it be adjusted?

    I tried them, but they seem to not be shipping it any more. I do not know who "Boyce in Utah," so a link would help.
  20. Beyond Biodiesel

    Clutch slipping, can it be adjusted?

    How about some part numbers so we all can have a shopping list to work from? PS: it does not look like anyone sells a clutch kit for the deuce anymore.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks