Search results

Thank you for clarifying that.

I cant find the post that explains it, but can someone clarify for me - on the 1040 who makes the engine. It's labeled Yanmar, but everyone refers to Cummins. was there an acquisition?

Thank you

I’m needing help identifying this HMMWV cover. It did not come with PN or CAGE . NSN photos attached

Good to know - thank you .

Got it . Thanks again .

TOTALY understand that haha ok , this answers all my questions, concerns and suspicions - of it being linked to the emergency stop . perfect answer ! I really appreciate you clarifying that for me. With that being said, I probably will make the purchase - New to the 1040 , owned many 803a’s ...

I have not purchased the 1040 . I want to get as much feedback - from SS - on this fault and warning I briefly scoured thru the TM - but with cataract and old eyes 👀- it’s hard to stay focused inside that TM. so I decided to ask for help . To see if these issues Are major and / or easily...

okay thank you ! where do you perform this operation ? “shut my disconnect off in the machine”

Thank you very much okay got it - 2 of those don’t seem like major issues . is this a big issue with the screen, is there a remedy for that? “ The screen doesn’t shut off, like on an MEP where the whole set goes dead on the DC side” maybe because he used a 24 V jumper to show me the panel...

I am thinking about purchasing an MEP 1040 from a local guy. The control panel screen reads: Fault : 1433 local E-Stop warning 365 (if could be 366 the photo is super blurry) maintenance item is active Genset Mode : Emergency Stop I scoured through a few manuals but I was not able to...

NICE !!! I’m looking & found a winner , thanks for that idea ! thanks guys

Has anyone tried these fuel solenoids from eBay ? They are Everywhere (coming from China I believe) OR even better , is there a place I can order a New boot that will work ? pics attached .

hi thanks for the list , I want to verify - which are these ?

ok I understand now , thank you very much for clarifying, and for the other assistance thru messages .

awesome , which lines did you remove and fill with carb cleaner ? I’m needing to do the same thing . Is there a photo/ diagram reference

everything looks good , except now I’m having some issues starting . batteries charged and load tested @ AutoZone ✅ FULL charge . fuel ✅ Primed for 5 minutes ✅. Throttle adjusted , still a no go . Any suggestions, before I dig thru the TM ? attached below 👇🏽 are 2 video links (after priming...

Ok I see , perfect ! Thank you

Okay ✅