Search results

  1. M

    FLU419 SEE HMMH HME Owners group

    Been a while since I posted here. Glad to see the crew is still kicking. Just got my first HMMH delivered last night. Way cooler than I even imagined! Going to give it a tune up and start fixing stuff. Sheared pin on a crane cylinder, seat back cover eaten by mice, speedometer not working...
  2. M

    MEP805B Generator High Oil Pressure issue

    Just picked up a surplus MEP805B. Hopefully, this post is not premature. I've seen some posts about low oil pressure, but I couldn't find any posts on high oil pressure. Unit looks good, low hours, supposedly works... Initially, I ran into a fuel level sending unit issue. It was corroded to...
  3. M

    #2 MEP 805B oh the joys

    Hey 155 - I also just ordered a pressure switch from mouser for my MEP805B. I thought I was getting something with 4 or 5 wires. I ended up with a 3 wire switch. What did they send you? Factory switch appears to be 4 wire. Sorry if this was addressed later in the thread. Any suggestions on...
  4. M

    I Need a Voltmeter Gauge for a CUCV M1009 1985

    Any idea if this is the same gauge used in the M1008? Mine is slightly different than the one you have pictured, as it has a little battery emblem bottom left and the word "volts" bottom right. It's an '85 truck. Thanks!
  5. M

    FLU419 SEE HMMH HME Owners group

    I was still bidding when my phone died. EI has them for $525. There were 7 brand new units. I needed at least one. Figured as long as I had less than $1000 total in the deal after shipping, I would be ok. Not particularly upset that I didn't get them though. The deal was a lot more attractive...
  6. M

    FLU419 SEE HMMH HME Owners group

    Ok, who won the heaters?
  7. M

    FLU419 SEE HMMH HME Owners group

    My impression was that the seller had zero experience selling on eBay and likely had a younger family member create the listing. I emailed him multiple times and couldn't even get a response. Judging by the pics, it's obviously a very successful farming operation, so I doubt they needed to sell...
  8. M

    FLU419 SEE HMMH HME Owners group

    The seller ended the Ebay auction prior to the scheduled close. Pretty sure he did a private sale with someone "off eBay". I suspect it won't be long before we see some pics on here...
  9. M

    FLU419 SEE HMMH HME Owners group

    I'm curious who else in the "club" was watching the trencher??? I was, although just as a voyeur.
  10. M

    FLU419 SEE HMMH HME Owners group

  11. M

    FLU419 SEE HMMH HME Owners group

    Looking good, Flufarm. Is that all steel?
  12. M

    FLU419 SEE HMMH HME Owners group

    I asked this question previously, in a slightly different way. But does anyone know exactly what "Overhauled at RRAD" means vs "Recapped at RRAD". I ran across this article tonight...
  13. M

    FLU419 SEE HMMH HME Owners group

    Where did you find that?
  14. M

    FLU419 SEE HMMH HME Owners group

    Thanks General. I actually had not read the rules until just now, and I didn't realize that talking about auctions was a no-no. I edited my most recent post and the pics, but I can't figure out (on my phone) how to erase the original pics. What SEE auctions recently closed without any bids?
  15. M

    FLU419 SEE HMMH HME Owners group

    Thanks FLUFARM! I knew the experts would help school this novice. Didn't I see someone add a top mount AC? That would help here in Mississippi. I think the guy had removed all the big implements and maybe the FOPS, put the spare on the roof, and added, among other things, a hydraulic welder...
  16. M

    FLU419 SEE HMMH HME Owners group

    Here is a SEE up in Alaska that seem to have a few unique characteristics, such as a 24" excavator bucket by Intergy Inc instead of CASE. There also is something that I don't recognize on the inside back wall of the cab, between the seats. And it's the only truck that I've seen with the rear...
  17. M

    FLU419 SEE HMMH HME Owners group

    Has anybody modified their truck(s) to get more HP or thought about adding a turbo?
  18. M

    FLU419 SEE HMMH HME Owners group

    Thank you to Simp5782 for dropping off some tires today! He told me about recently moving a SEE truck out of Texarkana that had more attachments than he had ever seen. Total shipping weight was 22,000 pounds. He mentioned a fork attachment for the bucket, a grapple attachment, and even the...
  19. M

    FLU419 SEE HMMH HME Owners group

    Wow, buying one or two of these would have really improved my average!! Did anyone on the forum buy one?
  20. M

    FLU419 SEE HMMH HME Owners group

    They are going fast!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks