Search results

  1. J

    MEP 002a spin on fuel filter needed

    I have a brand new set up for a 002 I never used if interested send me your email address I can send you pics, Thanks john
  2. J

    Pallet jack to move MEP-803a around shop?

    I always use just a pallet jack to move my gens, 802, 803, 003 all I do is take some 2x6 boards screw them together, lift the gen and slide the boards under 1 side at a time, it is actually pretty easy, then I put a lag bolt on each side of the frame to hold them in place. I used to use casters...
  3. J

    Can MEP 002, 003 or 803 Gens run without batteries

    Thanks for the help
  4. J

    Can MEP 002, 003 or 803 Gens run without batteries

    will running the 802a or 803a be ok running with no batteries at all installed?
  5. J

    Can MEP 002, 003 or 803 Gens run without batteries

    I recently saw a video where a guy jump starts his MEP 803 with a 24 volt jump pack, he has 2 remote starter terminals installed under the slave plug. He says starting this way saves on wasting money on batteries. My question is does anyone know if it is safe to run the MEP 803 or 002, 003's...
  6. J

    Ultimate well nut repair

    I just ordered the brass fittings from Plastic Mart if you call them instead of going through the website the shipping is much cheaper 866-310-2556
  7. J

    Ultimate well nut repair

    Thanks for finding a great alternative, I agree with not wanting to fix junk with junk.
  8. J

    Nos Jerry cans

    Yes I realize, but it is an option, at least that is what I thought
  9. J

    Nos Jerry cans

    I found a company http://www.lexingtoncontainercompany.com/Nato-Jerry-Cans.html, that seems to have authentic brand new jerry cans, worth checking it out.
  10. J

    Reset MEP-002a won't stay running more than a minute

    Thanks for all the help. It sounds like it is an issue with the pump timing, I will be working on it this week and let everyone know how I make out. Thanks for all the help so far, you guys are the best.
  11. J

    Reset MEP-002a won't stay running more than a minute

    Ddmk18 yes the valve cover gets very hot after running it a few times How do you check and adjust the timing of the injector?
  12. J

    Reset MEP-002a won't stay running more than a minute

    Isaac-1, Yes I get good fuel return to the tank, it is not a solid stream but it is a steady flow, is it supposed to be solid or a weak stream back to the tank?
  13. J

    Reset MEP-002a won't stay running more than a minute

    Keith J I have fresh fuel and the tank is brand new. I am using an external pump from another unit and not using the ones on the unit because there may or may not be an issue with them working properly. What drives me crazy is how it runs the first time the longest and after that it will not...
  14. J

    Reset MEP-002a won't stay running more than a minute

    R Racing, I did check the valve and it seems to be working and clean with no issues
  15. J

    Reset MEP-002a won't stay running more than a minute

    Jamawieb, I would welcome any help you can give me
  16. J

    Reset MEP-002a won't stay running more than a minute

    I have an MEP-002a that was reset and had 2.8hrs on it. I have tried to get it started numerous times, it will run the first time for about 2 to 3 minutes then gradually starts to die. If I run it after the initial 1st time it will not run for more than 1 min almost exactly 1 minute. I have...
  17. J

    Anyone replace 002/003 genset panel bulbs with LED's yet?

    There is a guy on here named Walt from RI, he used LED strip lights and mounted them to the top of the control box above all the gauges and it is very bright, I believe he said he used a ac to dc converter or vice versa, plus it was very inexpensive
  18. J

    Jerry cans

    try going to LEXINGTONCONTAINERCOMPANY.COM see if you like the ones they have
  19. J

    How do you do an initial setup of an MEP-003A

    Ike, Thanks that was the type of list I was looking for. Can you explain how to prime and bleed the injectors if needed? thanks John
  20. J

    How do you do an initial setup of an MEP-003A

    Can anyone list the proper procedure from start to finish on the best way to get a new MEP-003a which arrived with no fluids or batteries from GL ? I want to make sure I don't miss some little step that may be critical.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks