Search results

  1. Heavy D.

    M35A3 wheel tubes

    I have deleted all CTIS components many moons ago.
  2. Heavy D.

    M35A3 wheel tubes

    Please forgive me if this has been discussed, but Is there an inner tube that can be used with the stock M35A3 wheel? From what I can tell, the CTIS set up of the rim makes it a bit different with the routing of the stem. I am just burnt out on battling my old leaky wheels and have been...
  3. Heavy D.

    M35A3 Radiator Fan

    Long story short, 10 years ago when i was young and dumb i took my A3 through deep water and blew my fan apart. I have long since replaced it however my fan clutch control valve has failed and i had jerry rigged the fan to have 0 air pressure making it run continuously. Today i added a 2 way...
  4. Heavy D.

    Thinking about pulling the Deuce Trigger Again

    Wait really? That is great news because A2 Bearings are like 1/5 the price of an A3. Wouldn’t even matter to me since I disabled CTIS on mine anyway.
  5. Heavy D.

    M35A3 Speedo oil leakage issue

    Thank you, I will check on all you have suggested.
  6. Heavy D.

    M35A3 Speedo oil leakage issue

    I have this issue as well, is the speedo cable supposed to have oil in it for lubrication and a seal on the speedo failed? Either way my speedo stopped working all together recently so I will likely be replacing both.
  7. Heavy D.

    M35A3 very high OIL PRESSURE

    Noticed high oil pressure at approximately 65 PSI start up while idling on a 90 degree day, under load while driving the stock gauge pegs out. Today I hooked up a mechanical gauge and got about 55 PSI. during revs up to 2600 rpm it reached 100 PSI under no load. I haven't tested it while...
  8. Heavy D.

    Anybody have a parking spot?

    Indeed Ollied is sheltering Heavy D. Until I return. Thank you everybody for offering your assistance. I look forward to paying it forward with your future needs.
  9. Heavy D.

    Anybody have a parking spot?

    Thank you everyone for your generosity! I am going to bump this one more time and see if anybody else is a little closer. If not I would like to take Ollied up on his offer if it still stands. Again thank you thank you everyone for your willingness to help!
  10. Heavy D.

    Anybody have a parking spot?

    Hello everyone, I am in the Coast Guard currently assigned here in the NYC area. I am transferring to Kodiak Alaska for the next 3 years. I cannot bring my beloved M35A3 with me without paying a fortune. I don't know anyone that has any room for it. Is there anybody out there within 50 miles...
  11. Heavy D.

    NYC Veterans Day Parade !!

    So I went to change out the shocks on my M35A3 prior to the parade with ones I ordered years ago. Come to find out I ordered ones for the M35A2... So anybody coming to the parade want the pair of OEM shocks for a great low price of 20 bucks?
  12. Heavy D.

    NYC Veterans Day Parade !!

    Hello emr, I am in if you will allow. Just also wanted to make sure you got my email with contact info too. Thanks!
  13. Heavy D.

    A bit of oil in my M35A3 coolant

    I haven't posted in a while, and I had this same symptom on my own thread that I have not followed up on yet. I had it looked at by a pro, and he determined that it was not oil but fuel. Thinking about it they look a bit similar to someone not too familiar. Anyways the problem was the fuel...
  14. Heavy D.

    M35A3 Owners unite

    Mine is actually engaged all the time, so my clutch isnt bad according to the no air test. what could it be that makes it always engaged???
  15. Heavy D.

    M35A3 Oil in Anti freeze

    Not yet. I had to go out of town this weekend. I intend to bring the truck to the shop after work tomorrow. I will post first I hear anything.
  16. Heavy D.

    M35A3 Oil in Anti freeze

    True, I will drain the remaining coolant tomorrow and see if there is a difference. The engine "according to the gauge" says 341 hours, and 6,200 miles. I too was thinking perhaps something was broken loose during the jarring of the radiator a little bit. it reached 200 degrees because my old...
  17. Heavy D.

    M35A3 Oil in Anti freeze

    I drained around 3/4 of the coolant into a 5 gallon water jug and poured some out into the mason jar. I do not have access to a pressure tester. Is that something you can rent from an auto store?
  18. Heavy D.

    M35A3 Oil in Anti freeze

    Ok Gentlemen, here is how the lines are attached. As I see it, they are in accordance with the TM. I believe only the oil lines can attach to fittings specifically for the oil lines, so cross contamination is ruled out as far as I can tell. the last pic is a sample in a mason jar that has been...
  19. Heavy D.

    M35A3 Oil in Anti freeze

    Coming to think of it, the TOP and TOP RIGHT coolant and oil lines cannot be mixed up. the oil line is attached via a threaded fitting, the coolant line is merely a nipple with hose clamp. There is a "CAT house" about 30 miles away but I am deathly scared to hear any figures. When I was running...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks