Search results

  1. M1028A1ShelterCarrier

    HMMWV Thermostats

    Don't chance it to save a few $$$... https://genuinehumveeparts.com/product/5743238thermostat-65
  2. M1028A1ShelterCarrier

    Sf97 latest time frame

    Same dates and the clean SF97 arrived yesterday 7/13/22. One month shy of a year this time.
  3. M1028A1ShelterCarrier

    GOVPLANET/USMC latest EUC times?

    I called three months ago and was told, "it's in the next batch."
  4. M1028A1ShelterCarrier

    GOVPLANET/USMC latest EUC times?

    .......9/8/2021, picked up Feb 6th and nothing yet. :unsure: 3rd EUC in 5 years :mad::mad:
  5. M1028A1ShelterCarrier

    GOVPLANET/USMC latest EUC times?

    Same here. Picked up at MCLB Barstow around Feb 6th....
  6. M1028A1ShelterCarrier

    Sf97 latest time frame

    Same here, picked up on 2-2-22 from mclb. "It's in the next batch."
  7. M1028A1ShelterCarrier

    4 wire cable next to dog house

    I had this in my 1152 and the four wires ran to some type of fuse block behind the starter and on top on the frame rail. PIA to remove.
  8. M1028A1ShelterCarrier

    Stupid thermostat question

    For the 6.5/A2, OEM for me... https://genuinehumveeparts.com/product/5743238thermostat-65 cheaper at macs https://www.macmotors.com/Product/HUM/5743238
  9. M1028A1ShelterCarrier

    Turbo Intake Manifold Leak - Causes?

    A couple hours sitting in the seats, not bad.
  10. M1028A1ShelterCarrier

    Turbo Intake Manifold Leak - Causes?

    For me it was a bad cartridge seal. Excessive oil in the intake + compression in the crankcase. I pulled the turbo and leak tested it with water. The water freely flowed through the seal to the oil passage. $150 part
  11. M1028A1ShelterCarrier

    Yermo dust removal - pressure washer OK? Any other recommended appraoches?

    I just picked up another 40lb's of sand from Barstow Friday. I started with my shop vac followed by four sessions with the pressure washer. I am doing open heart surgery tomorrow to find out what's making my turbo sick. Then off to the machine shop!
  12. M1028A1ShelterCarrier

    GOVPLANET/USMC latest EUC times?

    Released today!!!!!!! M1152 won on 9/8/21 2nd Euc submitted in last 2.5 years on 9/10 9/15 submitted to TSC
  13. M1028A1ShelterCarrier

    A and B pillar reinforcement for armored doors?

    The 1151 picture was from the web of the part I need for a M1152. Thanks
  14. M1028A1ShelterCarrier

    A and B pillar reinforcement for armored doors?

    Are they threaded or just a spacer?
  15. M1028A1ShelterCarrier

    A and B pillar reinforcement for armored doors?

    That is exactly what I was looking for so Thanks! Is that just a spacer for the b pillar so bolts can run through without crushing or is threaded? Any idea the NSN or where I can get two? Thanks again
  16. M1028A1ShelterCarrier

    Bummer MV accident

    We had one up here at the MWTC where a M1151 went over in a ditch during daylight and killed the gunner. Tragic and preventable!
  17. M1028A1ShelterCarrier

    Bummer MV accident

    I was told to be careful as the truck can't be replaced as fast as Marines can!
  18. M1028A1ShelterCarrier

    A and B pillar reinforcement for armored doors?

    So I went ahead and ordered the above pictured stiffeners for nothing else than to get the interior rivet pattern. I may end up drilling the hinges to fit the old pattern if it's off. I have all the parts except glass and b pillar reinforcement to complete these doors now.
  19. M1028A1ShelterCarrier

    A and B pillar reinforcement for armored doors?

    These doors have the bend and fit perfectly. I plan on fabricating inside channel blocks with bungs unless I find something already built. The above pictured spacers appear to me that all of the notches are to clear the rivet pattern on the inside? I may buy those and mod them if necessary...
  20. M1028A1ShelterCarrier

    A and B pillar reinforcement for armored doors?

    After searching all of the parts TM's, I am unable to locate any diagram that shows reinforcement on the body side for piano style hinges. Can someone point me in the right direction in the TM (body side reinforcement) to mount heavy doors, share some pictures, or a source for parts. I found...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks