Search results

  1. hummer4x4guy

    4L80 machined oil pan recommendations.

    If the pan lip has an issue it’s always going to leak. It was a brand new pan that was installed. 3 attempts and still leaks enough to cause an issue. I wish the OEM pan and seals would of done the trick as I don’t want to put out the cash for a machined pan but it’s that or one day run too low...
  2. hummer4x4guy

    4L80 machined oil pan recommendations.

    This past weekend I did my 3rd attempt to get my transmission pan leak fixed. It didn’t happen. So I want to go with a machined pan and I am looking for suggestions on a pan that is good to go with. One with a drain. One that will clear the cross member of which mine has about 3/8 of extra...
  3. hummer4x4guy

    Michigan wrecker needed, make some $

    I have a friend who’s husband passed away at the beginning of the year. She has some heavy pieces of scrap metal and a likely non working mini front loader she wants to get rid of. She is just south of Imlay City. She has a pintle trailer that is heavy duty enough to carry the scrap but has no...
  4. hummer4x4guy

    Aluminum troop seats/benches

    The frame only is aluminum and the bench seat and back section are fiberglass.
  5. hummer4x4guy

    Aluminum troop seats/benches

    I’ve heard that we now have aluminum benches for the 2 man truck set up. Anyone know of anyone or places that have a kit for sale?
  6. hummer4x4guy

    At what speed does the torque converter lock in a 4l80e trans

    I’ve been wondering if my truck isn’t locking up as well. When I’m doing 65 MPH via GPS I’m at 2500 RPM on the nose. The trans shifts wonderfully but I’d sure like to have the RPM a bit lower. :/
  7. hummer4x4guy

    2019 Findlay Oh, Armed forces day show May 17-19 Sell+ swap

    I’ll be there Friday. Always looking for humvee tires and vinyl front camo doors for humvee. Also looking for humvee memorabilia. I will bring a 2 man arctic humvee top (real insulation) for sale/trade. Likely some other humvee parts oh and a camo cargo cover for an FMTV? The sides have a...
  8. hummer4x4guy

    Melting instrument cluster light lenses

    There was a notice put out some time ago due to this issue and replacement bulbs were sent out. I somehow got a few of the new "kits" with the new proper bulbs to correct this issue. The bulbs in the kit are ge1864, not sure what the bulb # was that originally came in the trucks.
  9. hummer4x4guy

    Humvee Speed

    Have you guys checked the differentials to see if those are the same? Just because these are trucks doesn't mean he shouldn't ask or wonder why similar trucks are acting so differently. It is a good thing to figure out if there is an issue now vs later.
  10. hummer4x4guy

    flexline brake line kit looking for part #

    Guys, I am looking for the part # for the rear passenger side brake line that screws into the brake caliper. I had a good bolt failure in that area and the steel section of the line got kinked. I am thinking its a 12460511 but i am not sure. I can't find the paperwork from the kit to verify...
  11. hummer4x4guy

    What have you done to your HMMWV today/lately

    I've changed my filter once in 15 years. If the restriction gauge isn't showing a plugged air filter it's still good to go. Sent from my iPhone using Tapatalk
  12. hummer4x4guy

    Lots of Questions about 4L80E Swaps

    One note i'd like to add is the 4l80 internal wiring harness issue that they can leak. I had to replace the harness inside my transmission because it was damaged. The one I replaced it with was not of the best quality and the trans fluid would leak through the bulkhead plug and seep through...
  13. hummer4x4guy

    What have you done to your HMMWV today/lately

    Video of the new engine idling. https://youtu.be/GglwDSSITOA Got the rear driveshaft installed. Body bolted down. Evans coolant in. Lights are working except two side marker lights. Got that dang wiring harness connector leak still but it seems to have subsided. Some other things to do...
  14. hummer4x4guy

    What have you done to your HMMWV today/lately

    I've not posted in a while on my trucks progress. Still working on it. But closing in to being done (road worthy done). Dropped off the rear driveshaft to get the yoke and driveshaft joined together. Need to install the block heater and one freeze plug then pour in the Evans coolant. Tighten...
  15. hummer4x4guy

    Humvee M998 Brake Pedal Release Problem

    Has it always done this or did the problem recently start?
  16. hummer4x4guy

    What have you done to your HMMWV today/lately

    The signs can come with magnets but mine has 3 holes along the top and bottom for bungee cords. Sent from my iPhone using Tapatalk
  17. hummer4x4guy

    What have you done to your HMMWV today/lately

    Got my convoy ahead/follows reversible sign. Sent from my iPhone using Tapatalk
  18. hummer4x4guy

    What have you done to your HMMWV today/lately

    Yep. Whole new driveline and other upgrades and fixes along the way. Sent from my iPhone using Tapatalk
  19. hummer4x4guy

    hmmwv tachometer installation

    Do you want only the mount? Or the whole kit that mounts on top of the windshield? Sent from my iPhone using Tapatalk
  20. hummer4x4guy

    What have you done to your HMMWV today/lately

    Did all this today solo minus setting up the portable gantry I had a coworker help me with that. Start to finish was about 9:20am to 4:20 pm. I'm spent. Sent from my iPhone using Tapatalk
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks