Search results

  1. Blackmagic94

    MEP-805A voltage issues

    What relay powers the coolant temp gauge
  2. Blackmagic94

    MEP-805A voltage issues

    Every single fuse made the tone on my fluke
  3. Blackmagic94

    MEP-805A voltage issues

    I’ll recheck it via ohms. Thanks
  4. Blackmagic94

    MEP-805A voltage issues

    The back one by a1. I know the front one works because I have dc charging
  5. Blackmagic94

    MEP-805A voltage issues

    Actually fuse shows 2.2 vac and goes down slightly as you move s1 to start
  6. Blackmagic94

    MEP-805A voltage issues

    Swapped another used fuse. No vac 0.00 Do I put power on pin 7 and 8 and ground to chassis to test vac. If so I’m getting pin 7 1.7 vac run 0.6 vac with switch in start held for seconds pin 8 2.60 vac run 0.335 vac start
  7. Blackmagic94

    MEP-805A voltage issues

    Will report shortly
  8. Blackmagic94

    MEP-805A voltage issues

    Is the fuse reading vac or dc. I’m getting like a 0.1 vac on it
  9. Blackmagic94

    MEP-805A voltage issues

    Yes and I swapped another one in to it. But that one could be bad as well. I am getting dc alternator charging
  10. Blackmagic94

    MEP-805A voltage issues

    I also removed and inspected each relay and changed each fuse. The bus by the voltage regulator appears to have the 12 gauge bypass wires to protect the circuit if equipped with optimal which I am running 6tls which are brand new
  11. Blackmagic94

    MEP-805A voltage issues

    The set is new to me. Last user was DoD so no clue on function holding the run switch for 10 seconds you see maybe or even bumping while running the voltage jumps Maybe 5-10 vac Battle short doesn’t change anything either. what about doing the overspeed reset. I’ve read some of the tm
  12. Blackmagic94

    MEP-805A voltage issues

    Problems on this set I bought runs and runs strong 1. water temp gauge has no reading. Pegged fully left of scale 2. Low voltage warning light is on 3. Ac interupter light up when pushed, lights up when switch is flipped, turns off when switch is released 4. 48 hz when on 60 ha setting...
  13. Blackmagic94

    M939 with tac4

    It’s at Yuma Proving Grounds. I will be hauling it to the local yard to have make ready performed on it due to it being historical and can get higher auction value. It has electronic diff locks as well on the dash
  14. Blackmagic94

    M939 with tac4

    I have number 4 about to be inspected for auction at Govplanet
  15. Blackmagic94

    How many more HUMVEES for sale on Gov Planet?

    They have sold 3330 to date right now. It's very easy to look this up on there website.
  16. Blackmagic94

    M998 payload questions

    M998 is not a slantback such as a m1025 etc
  17. Blackmagic94

    SF-97 Gov Planet to stop providing them ?

    No I won't delete that comment. JWade works for Gp and I'm asking him to clarify what he meant about exploring titling options with other states. If Gp is making this comment we deserve to ask for clarrification.
  18. Blackmagic94

    SF-97 Gov Planet to stop providing them ?

    Are you stating that Florida may issue a road title soon jwade?
  19. Blackmagic94

    M1097A2 swap to M1025A2 help.

    How do you have an A2 that doesn't have a 6.5l?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks