Search results

  1. B

    Jump Starting MEP803A

    Well thank you! I I haven't looked in the front of the book yet. I did check the wiring of the alternator and mine certainly wouldn't survive that, the way it's hooked up now.
  2. B

    Jump Starting MEP803A

    Unlike an 831a. The alternator needs to be hooked to a battery or it will smoke. That is why battery selector switches tell you not to turn them off while the engine is running and they have make before break contacts.
  3. B

    New MEP 802 New User New Mods

    Solder makes for a brittle joints down to the Strand level.
  4. B

    Ultimate well nut repair

    Between the plastic tank and the nut.
  5. B

    Heating a S280

    For what it's worth mr. Heater is on sale at Summit Racing
  6. B

    Corrosion Control Cart

    That was for .625 x 1" x wildcard.
  7. B

    Corrosion Control Cart

    I'll try and get you part numbers for those other pieces this evening.
  8. B

    803a hours

    Mine starts with the $20 230cc! Although I wouldn't recommend them ther are pieces of junk
  9. B

    I joined the 803A club as well!

    I don't have one so it doesn't matter to me. What I was talking about is obviously above that guys pay grade as they say.
  10. B

    TM for American Kleaner steam cleaner

    I have plenty of those 50 foot steam hose assemblies. 3/4"
  11. B

    I joined the 803A club as well!

    That sounds really good. But the problem is one shuts off the other one turns on and back and forth. There needs to be some sort of a dead band where nothing happens. The alternator maybe adjustable haven't looked into it that far. The battery maintainer/charger certainly isn't. If I had a...
  12. B

    A not-so-funny story (hz)

    Just had my $500 fleBay offer declined!
  13. B

    I joined the 803A club as well!

    Good question. No not really. I haven't seen it kill anything in my years, running for a short period of time. You would have two regulators fighting each other. Thinking of work around now.
  14. B

    803a hours

    If they are red or blue no. 12.75v, depending on temperature is perfect. Optima says float up to 13.8v. Little too high for me as far as battery longevity goes. If you have the yellow tops add .2 volts. Never try to equalize a sealed battery. You are well above the voltage were sulfation starts...
  15. B

    Ultimate well nut repair

    So I started thinking about my 831a. No leaks but I was wondering about the well nut. And I'll be darned if lo and behold they come with the correct part I spect for the other generators. Imagine that!
  16. B

    803a hours

    13.2v is float
  17. B

    Ultimate well nut repair

    That wouldn't work too well it doesn't have a Groove for the O-ring to sit in. That's a bulkhead fitting for an airline.
  18. B

    MEP831A recoil start, bleed fuel lines

    Opening and closing the contactor while under load is not recommended.
  19. B

    MEP-803A Pegs fuel gage all the way down past empty.

    Of course it is you think I would tell you to buy the wrong stuff?😁
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks