Search results

  1. Garagefull

    7520lbs and 130 hp

    But if we take the load weight off and a locked converter away from your setup,I cant put enough heat thru the turbo to produce boost. Now let’s take your truck and take the load off.I am using arbitrary numbers here, with the load off I only need probably a fifth of the throttle as compared to...
  2. Garagefull

    7520lbs and 130 hp

    I have a Impco system That has been eating up garage space for years. Maybe I need to pull it out and give it a good look. I’m gonna pull up the specs and dimensions on that DT. I’m not looking to build a race vehicle, and the 6.2 is actually doing as well as you could expect it to, simply just...
  3. Garagefull

    7520lbs and 130 hp

    As the title says. Scales at the landfill said 7520 LBS. Somethings going to have to give, 130 hp is simply not getting the job done. The Duramax conversion is too darn much money, A turbo is not going to help much way down low. I said that I would never do another Cummins conversion, as they...
  4. Garagefull

    Wake Island Survivors

    We cannot forget these men. Abandoned in the middle of the Pacific. If you are unfamiliar with this terrible time in history, please take a couple minutes and put yourself in their place all thise years ago. Try to picture the timeline of events that transpired after December 7 for these men. My...
  5. Garagefull

    Harmonic balancer and waterpump

    I thought ohms law was a secret that all electricians Had to take with them to their death. Lol
  6. Garagefull

    LB7 swap... anyone done this?

    Well,im out. I figure by the time it’s installed I’m looking at nearly a $5-7k conversion by the time I get drive shafts cut etc. i’ve got an F code 6.5 turbo, thought about ditching the DS4 and converting it over to a DB2. I’ve got to get just a little more grunt into the old girl, and I’m not...
  7. Garagefull

    Rear wheels hop when in snow

    Be sure that the clamps on the outside ends of the spring packs are intact. They keep the spring packs from spreading open under load. I had a similar situation on a big block one ton. Also be sure that the leaves are a smooth curved arc,not wavy so to speak. When they are no longer a arc,the...
  8. Garagefull

    LB7 swap... anyone done this?

    I am contemplating a D Max swap right now. I really like 6.2/6.5 engines, but with the lift kit and 37 inch tires and all the gear they just don’t have an ample supply of grunt. I was told the early Duramax vans came equipped with a 4L 80 using a standalone controller. I thought about...
  9. Garagefull

    6.2 IP rebuilt ...

    I think they might be referring to a seized rotor head,which distributes the presssurized/metered fuel to the injector. If the rebuilder doesnt use correct terminology,you might consider a diff vendor. Those rotor heads are expensive. If you take those pumps apart, they are very simple. If the...
  10. Garagefull

    Little oil drops...

    Check your CDR valve to be sure that crankcase pressure isnt forcing your small leak.
  11. Garagefull

    6.2 on its way out?

    The fuel temps on the return side would be my guess. As far as gelling, I have operated vehicles as low as 20 below zero and have never had a fuel issue.
  12. Garagefull

    No Start Issue Since Dying While Driving

    That blown fuse throws a little bit of confusion in there. I am afraid that I would have to try a solenoid before I changed out that pump. Just because it is clicking, doesn’t mean that you’re getting the right amount of travel. I’ve been driving 6.2s since 1986 and I’ve only had one solenoid...
  13. Garagefull

    fast idle temp switch

    After seeing those price increases,I am glad I have been hoarding parts.
  14. Garagefull

    M1009 Braking Issue

  15. Garagefull

    M1009 Braking Issue

    In my experience,make sure the rears are working. Does it have the ride height proportiong valve in the rear?When my lift was installed on me m1031,it changed my ft/rr proportioning which made it woller all over at lights ect. A simple adj fixed both the steering pull and far better brakes.
  16. Garagefull

    What have you done to your CUCV today/lately - Part 2

    Lol. What have you done to your cucv today? I have been using it for a mobile scaffold to give the house a wash down. I ended up using it to rip that smart meter right out of the socket when I backed into it .
  17. Garagefull

    What have you done to your CUCV today/lately - Part 2

    Ripped the power companies smart meter clear out of the socket today. Thankfully no damage to the box
  18. Garagefull

    M1031 rear box mount

    If all else fails,Go to your local skid steer repair and get an old tire. A holesaw and a little bit of WD-40 and make your own.
  19. Garagefull

    Anyone Use Inline Tube Brake Line Kit?

    I have not used that particular kit, I bought one for a car restoration and it was flawless. Fit like a glove.
  20. Garagefull

    M1008 Won't Start

    A bad glow plug, which is less resistance introduced into the circuit will allow a voltage increase across your resistor. That is the cause of your cascading effect.
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks