Search results

  1. jedawson1

    Name this Part 1951 M37

    Thanks for the help.. It Figures thats where it goes, I'm working my way to the drivers side as a finish up spot. So far everything has been straight forward.
  2. jedawson1

    Name this Part 1951 M37

    After 7 years and 2 additions to my family, I have finally got around to reassembling my truck. I have this Part (pics attached) and for the lift of me can't identify it. I am submitting myself to the brutality of the internet, fire away. She is really dusty, but all the body parts have...
  3. jedawson1

    M37 square lock washer / body washer questions

    Got a box of goodies from John at Midwest. The welt looks like good quality and the new bed bolts are 5 1/2 inches long which should fit perfect. Sent from my XT1585 using Tapatalk
  4. jedawson1

    M37 square lock washer / body washer questions

    No need to remove them, the bolts he shipped me are 7" long and they hit the top of the tie down shackle bracket. I believe 6" will work but there isn't enough thread for me to cut Johns bolts down. Sent from my XT1585 using Tapatalk
  5. jedawson1

    M37 square lock washer / body washer questions

    Perfect picture of the bolts, I'll fwd to John at Midwest Military, his bolts are an inch too long. Based on your welt picture I may just order the M923 hard top welting, I can cut the bead off one side and it would be darn close in appearance but be full rubber. Sent from my XT1585 using...
  6. jedawson1

    M37 square lock washer / body washer questions

    Here are a few of the welt strip. Sent from my XT1585 using Tapatalk
  7. jedawson1

    M37 square lock washer / body washer questions

    I remember the solid rubber with bead, it was like the M923 hard top welting strips. I have some vinyl wrapped foam but it is about 1/4 thick and would compress when installed. Sent from my XT1585 using Tapatalk
  8. jedawson1

    M37 square lock washer / body washer questions

    I remember a weather strip between the outside removable wheel wells and the bed side panels. Did you guys put one back in when you rebuilt your beds? I'm curious if it would hold water and cause problems or if rubbing from vibration would cause more harm. Sent from my XT1585 using Tapatalk
  9. jedawson1

    M37 square lock washer / body washer questions

    That would help John and me out with confirming bolt length. Sent from my XT1585 using Tapatalk
  10. jedawson1

    M37 square lock washer / body washer questions

    That is a perfect shot, John at Midwest is measuring, he thinks he shipped me the wrong length bolt. It's 7" and I think it should be about 5 or 5 1/2. Based on the size of the rear crossmember and the fact that it sits on the frame without a standoff. Sent from my XT1585 using Tapatalk
  11. jedawson1

    M37 square lock washer / body washer questions

    Trying to figure this out, The rear cross member bolts I bought from Mid West Military seem to be too long. See attached picture, I've circled area's in yellow. The bolt is hitting the tie down shackle and is not able to seat down against the top of the rear cross member.
  12. jedawson1

    M37 square lock washer / body washer questions

    Thank You all for your input. Storm51, Thanks for the pictures, just what I needed. Looks like snake river is the only place for correct washers, I'm contemplating just using modern bolt,lock washer, and washer on the body panels. I am not interested in showing the truck as 100% period...
  13. jedawson1

    M37 square lock washer / body washer questions

    I could use some direction from you seasoned guys: What are you or have you used as an alternative to the square lock washers for you body bolts? I have found lots of toothed lock washers and even some similar square lock washers but they look mighty aggressive and I am concerned they will...
  14. jedawson1

    M923A2 Doing 80 MPH!!

    Breaking the speed rating of the tire, breaking the speed rating of the truck, and just plain breaking the speed limit. What could go wrong!
  15. jedawson1

    Any body live & have storage to rent near Fort Campbell,Ky ?

    Your paperwork is correct, Fort Campbell is right on the state line of TN & KY.
  16. jedawson1

    Any body live & have storage to rent near Fort Campbell,Ky ?

    Fort Campbell is about 2.5 hrs from the TN / GA line. Fort Campbell is on the northern edge of Clarksville,TN. My LZ is 80 miles south east of the base, I have plenty of room, but if you haul it to me its probably worth hauling home.
  17. jedawson1

    What to Look for When Buying an M923

    CTIS can be troublesome on the a2 variants, but there are some threads that cover most of the common issues the repair. The 939's are good trucks, you'll be glad you have it, though storing it 300 miles away doesn't sound good. At that distance you would never use it, it will take you 5 hours...
  18. jedawson1

    Hmmm..do you like low flying aircraft?....then here ya go!

    I shall resist the urge to prevent another from being reckless with his own life. But when he is reckless with an unwilling other, it is then I must act. How would that apply to someone else's aircraft?
  19. jedawson1

    OMG HMMWVs FOR SALE

    What HMMWVs are for sale?
  20. jedawson1

    HMMWV's for sale, no longer maybe, it happened

    I'm with welldigger, they are a bit wide to haul around frequently, and unless the prices get below $3500, they aren't worth buying for a farm or hunting truck. I'd love to have one, but not under the current restrictions and starting price mentioned. I am glad to see officials making...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks