Search results

  1. linhster

    Aftermarket Wheel Lugs size?

    Got a set of aftermarket lugs for the wheels but they seem to be very tight. It's not damaging the studs but seem like it's not the right size. The purchased lugs were 14mm x 1.5 threads (looked up the H1 specs and this was the size given). Also happen to access to a H1 and the lugs on it...
  2. linhster

    Body Panel Thickness and Aluminum type?

    Does any one have this information?
  3. linhster

    CTIS Quick Disconnect

    I am having a hard time with the quick disconnect for the CTIS. The system is leaking an I thought it was from the QD... I tried to separate the QD but its seem to be stuck together. Thinking that it was an issue with the unit, I ordered new replacement. When the new unit arrived, it was...
  4. linhster

    Has anyone converted a 6.2 into a turbo charged unit?

    You must have a lot of experience with diesel motors, or are these references based on gasoline/nitrous/alcohol engine? If it's that easy and cost effective, I think AM General would have implemented it for the military, don't you think? Sent from my iPhone using Tapatalk
  5. linhster

    Instructions on using Run Flat Tool

    I did get it from eBay. And their was no ratchet. Can you post a picture of the complete tool kit?
  6. linhster

    Instructions on using Run Flat Tool

    Really struggling with the way the strap are properly attached to the tool. Any help would greatly appreciate. Instructions seem to by pass this stage.
  7. linhster

    Paint prep - which degreaser?

    How did you applied this product? Wait time? And procedure after application and before paint? Thanks
  8. linhster

    Slow Speeds

    Sorry to laugh at this but I find a lot irony and humor in this [emoji23]. Sent from my iPhone using Tapatalk
  9. linhster

    Slow Speeds

    Congrats, get to know it and have fun with it.. Yes, there are lots of members with vast knowledge on this forum. We are very lucky to be able to pick their brains on this unique vehicle.
  10. linhster

    Rivets on HMMWV

    Sorry, but I don't have the special gauge tool to decipher the exact rivet. Which Cherrymax rivet ( item, part #) do I choose for the standard two layers fastening? Sent from my iPhone using Tapatalk
  11. linhster

    Ongoing Log Of My 1987 HMMWV

    Hard to imagine that the electrical system is in that much of disarray. I would verified that the light switch is working correctly. It seems that you been doing a lot of homework on the humvee but just to rule out the simple stuff, read up on the operation of that switch. They are not...
  12. linhster

    Slow Speeds

    I would love to hear about actual events about "iron clad assurance" . Can we move this to a new thread? Sent from my iPhone using Tapatalk
  13. linhster

    Slow Speeds

    What does that cover (I mean from GP) ???? I was always curious. Sent from my iPhone using Tapatalk
  14. linhster

    Slow Speeds

    Unlike a woman (no disrespect to any ladies out there), you can and will understand the HMMWV but only with valuable time and experience. Good luck and have fun with your humvee. Happy Valentines Day [emoji23][emoji23][emoji23] Sent from my iPhone using Tapatalk
  15. linhster

    Slow Speeds

    That is not it! There is a compartment behind your seat (driver). Please look at the 4 man config to see where the rear seat are. It's below that. Sent from my iPhone using Tapatalk
  16. linhster

    Slow Speeds

    I said 1st and 2nd. Low down and look into the info... Lots out there.
  17. linhster

    Slow Speeds

    Oem location is below the seat on the driver side rear. TCM box is there.
  18. linhster

    Slow Speeds

    Try these test if you have a multi meter.
  19. linhster

    Slow Speeds

    If the 4l80e is in "limp mode", you will only get 1,2 and reverse. Limp mode are usually electronic related and it's not getting relevant sensor data. Hence to protect the transmission it will operate in those gears.
  20. linhster

    Wildwood Caliper Upgrade for front

    I knew about them from my hot rod days. Cool factor only for their stopping power not for show. Planning a Duramax/Allison in the future and wanted to learn more about it. Just think it would be a nice upgrade if I can find them for reasonable price. While we are on braking topic, I am...
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks