Search results

  1. maddawg308

    VA Dodge M880 #6 spark plug cable - NOS - $5

    New Old Stock #6 spark plug cable for the Dodge-made M880-series of military 5/4-ton pickup trucks. NSN 2920-01-040-4496, 10/83 contract date. Sealed in original plastic wrap. Only have one available. US shipping only. $5 plus the ride to you. Prefer PayPal F&F.
  2. maddawg308

    TB QM 47, Lantern, Gasoline, Leaded Fuel, dated June 1945

    The operator's manual for the Coleman 252-style milspec lantern, made from WWII through 1993. This manual is dated 1945, and covers operation, exploded parts diagram, troubleshooting and basic repair.
  3. maddawg308

    Manual for Ken Tool geared lug nut wrench for military trucks with rear duals

    This manual is the official instruction sheet for the Ken-Tool manufactured geared lug nut wrenches, used to remove the rear dual Budd-style lug nuts from the M35 series deuces, the M211 series deuces, and the M54/M809/early M939 series 5-ton trucks.
  4. maddawg308

    No. VA area down to GA rally?

    Is anyone from the No.VA/MD/So.PA area going down to the GA rally later in October? I have 4-6 geared lug nut wrenches that may need a ride down there, seeing if someone could spare a little room. Meeting around the I-81/I-66 intersection, or thereabouts.
  5. maddawg308

    Decent paint job with brush and roller - anyone?

    I remember it wasn't too long ago I met someone who painted their truck with a brush and roller - the results were surprisingly good! I'm not talking about show-grade or anything like that, but I was surprised how good it turned out. Anyone painted their military truck with a roller? What...
  6. maddawg308

    runs from GL in OH to Mid Atlantic states?

    I used to sell surplus for a living bout 15-20 years ago. Back then, I bid on auctions all the time from Tobyhanna PA in the north, as far south as Ft. Bragg in NC, and as far west as Ft. Campbell in KY/TN. I covered a LOT of area. Back when you had to bid on the auctions in person, before...
  7. maddawg308

    March 4,2017 Jim Thorpe,Red Ball Swap Meet who's going?

    Got my tables paid for, about 3-1/2 weeks away right now. Who's planning on attending this start-of-the-season event?
  8. maddawg308

    Red Ball Swap Meet in Jim Thorpe PA - March 5th 2016 - who's going?

    Got the email from Jim G. about the upcoming event. Indoor parts swap meet-n-greet, first show of the year to get people out of their winter doldrums. Who's planning to be there?
  9. maddawg308

    MadDawg's new CUCV M1009 - recovery NY to VA, 375 miles

    Well, had to get another vehicle since the Dodge is pretty much toast and can't move around much anymore. Knew that camogriz in NY state had his CUCV M1009 for sale along with a M101 trailer for a good price, thought it might be a good candidate for a semi-daily driver as well as a vehicle I...
  10. maddawg308

    information on M101 3/4-ton radio antenna support trailer?

    There used to be a pile of 3/4-ton trailers at Colemans' Surplus that were antenna support trailers. They didn't have an extendable antenna in them that mounted and extended while in the trailer, it was merely a trailer that had lots of cabling, antenna masts, a small genset, and related radio...
  11. maddawg308

    Recovery Training Manuals for M553 GOER 10-ton wrecker

    A few I scanned for those who have the biggest 4x4 in the MV world. Recovery and wrecker operation training manuals for the M553 GOER, from Aberdeen Ordnance Center, MD, 1984.
  12. maddawg308

    differences in frames between CJ2A, CJ3A, M38 and even Willys MB?

    Was there any appreciable differences in the frame design between the WWII Willys MB/GPW, the CJ2A/3A, and the M38? Or for the most part, are they the same?
  13. maddawg308

    who do you recommend for rebuilding CUCV injection pumps?

    Have a few CUCV M1009s in the area I am looking at, relatively-rust free units which I like, but two of them have IP issues, and will probably require rebuild. Do any of you recommend anybody who rebuilds these pumps, good job for a good price? I priced new injection pumps from NAPA and...
  14. maddawg308

    pickup in Portsmouth - where's that guy who was in the Coast Guard Reserve?

    There was a guy here a while back, maybe a year or so ago, who was located near Portsmouth and he was in the Coast Guard Reserve. Said he could get in, pickup from GL, and get off base in a matter of minutes, since he had a Reservist ID and just got waved in. I think he had a 5-ton M923 or...
  15. maddawg308

    any info on radio switch box SA-2237/U ??

    Have this listed for sale, someone is interested in it. However, other than the info on the data plate, I don't know much about it, and Google isn't much help either. It appears I have the only one known to man. :) Anyways, here the info on the data plate, and a pic - if anyone has had...
  16. maddawg308

    M60/M108 deuce wrecker - heavier frame or standard?

    Was wondering if the early deuce wreckers, the M60 and M108 series, had double frames or more reinforcement in the frame, or was it just a wrecker body sitting on a standard deuce frame? I know the 5-ton wreckers are double-framed or strengthened more than standard 5-tons, but wasn't sure about...
  17. maddawg308

    repower options for M123 tractor

    I have a buddy west of here who isn't on Steel Soldiers, he owns a M123 tractor, one of the early ones with the LeRoi gas motor in it. The truck is in nice shape, but the motor suffered a detonation many years ago, so there is a hole in the block, and the rest of the motor got scavenged for...
  18. maddawg308

    audio amplifier ideas to mate with R-390A - schematics needed

    I dug out my R-390A that I was given a few years back by a friend of mine, I have to test it out and see how it performs. It's a beast, and not in the best condition internally, so it will probably need some parts and TLC. One thing I've been thinking of is I need to build a rack-mount audio...
  19. maddawg308

    source for covers for the M116 series genset trailers?

    Does anyone know where you can purchase surplus (new or good used) covers to fit the M116 series of genset carrier trailers? These are like the M101 3/4-ton trailers, but they are flatbed with no metal sides, and the bows/staves are longer vertically. M101 trailer covers won't work, they are...
  20. maddawg308

    Red Ball rally in Gilbert PA, Sep 2014 - who's going?

    Only two months or so until one of the best rallies on the East Coast happens! Who's attending this year?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks