Search results

  1. FLYWHEEL

    Inner tube valve sizes

    Hi everyone, hope you are all well, I've been looking to get some spare innertubes for my truck, in the T.M.s they are listed as 9.00 x 20 with a TR 443 metal valve, unfortunatly i can't find tubes over here in the U.K. with that valve stem size. So my question is could i use a different valve...
  2. FLYWHEEL

    m35a2 boost guage install

    I installed the gauges on the steering tube, using some light brackets
  3. FLYWHEEL

    m35a2 boost guage install

    I also connected mine to the intake elbow, just had to remove the plug that was there.
  4. FLYWHEEL

    What did you do to your deuce this week?

    Installed some extra 'blind spot' mirrors today, everything helps when driving a left hand drive truck over here in the U.K.
  5. FLYWHEEL

    Primary fuel filter housing replacement?

    I'm thinking of doing this in the near future, can you reuse the fittings from the old filter or are they different. If so what fittings are required.
  6. FLYWHEEL

    Thread sealants

    Thank you very much for your help
  7. FLYWHEEL

    Thread sealants

    Are those adjustment nuts 1/2 inch
  8. FLYWHEEL

    Thread sealants

    E.G.T and boost gauges fitted. Hopefully I will get time to do the bypass this weekend.
  9. FLYWHEEL

    Thread sealants

    Thank you for your posts, very informative and helpfull
  10. FLYWHEEL

    Thread sealants

    Even if I loop the fuel line I still have to swap the T fitting with the elbow, and will need to seal the threads on them.
  11. FLYWHEEL

    Thread sealants

    I think that I will have to introduce new parts anyway as I think that my old fuel line may be brittle and break when trying to loop them.
  12. FLYWHEEL

    Thread sealants

    Hi, A quick question, which thread sealants do you use for fuel fittings etc on your vehicles. I am about to bypass my FDC and want to plug up the holes instead of looping the fuel lines. I don't realy want to use Teflon tape and would rather use a paste or liquid sealant. So what are your...
  13. FLYWHEEL

    What did you do to your deuce this week?

    Installed my egt and boost gauges, drilling and tapping for the egt probe wasn't as difficult as I thought it was going to be, also removed the small plug on the intake manifold to connect my boost gauge to. Next on the list of things to do, F.D.C bypass
  14. FLYWHEEL

    Flame heater

    I've never had to use it, she always starts first hit of the button, but as you said best to put it as per the TM, or I may delete it at some point
  15. FLYWHEEL

    Flame heater

    I just found this picture on here of the flame heater fittings (circled), but noticed on my truck that they are reversed. The TM also shows them in the configuration in the photo. So my question is does it mater or will it cause any problems.
  16. FLYWHEEL

    Deuce brake shoes issues

    Have you got a cup like retainer on both ends of the springs, if so they have been assembled incorrectly as there should only be one retainer on each spring and a cup like washer on the lower pin as highlighted in diagram.
  17. FLYWHEEL

    Deuce brake shoes issues

    I have seen this problem on another site, and the issue was caused due to the upper and lower hold down pin hardware not being assembled correctly.
  18. FLYWHEEL

    M35a2 White Smoke

    Latest video posted, looks like it is clearing up to me
  19. FLYWHEEL

    M35a2 White Smoke

    First video posted(check my next post)
  20. FLYWHEEL

    Sequential 'fire up' M45530C TFFT

    Wow what a collection, extremely jealous.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks