Search results

  1. Artisan

    18,000 WINCH MOUNT

    This is what I ended up with. I added a center 3" x 3" x .250 wall support underneath and I axed the origional vertical support and made my own. The reason for the vertical is you not supposed to pull from the top of a winch.
  2. Artisan

    18,000 WINCH MOUNT

    That's not a bad idea.... Maybe have one piece waterjet cut from .375 or .5 steel like this and just get longer Grade 8 bolts and add undeneath...
  3. Artisan

    18,000 WINCH MOUNT

    The 10" channel is about .262 thick. There are 8- M12 bolts thru the bottom. I ordered some proper oversized washers for the 8 M12's. The rear strongback got upgraded to 2.5" x .25" square tube... All welds, top and bottom are to be uniwelded. Darn thing is heavy Ha~! Here is the bottom of...
  4. Artisan

    18,000 WINCH MOUNT

    The plan right now is to add a piece of 2" x 2" radius corner'd tailer hitch tube along the rear edge for more support. To be stitch welded top AND bottom. The front edge will be uniwelded to trailer's channel . Plus the .375" mounting plate / armorment.
  5. Artisan

    18,000 WINCH MOUNT

    So the TILT trailer I am fixin' up for my M916 is getting a winch. I bought two of those 18,000 lb WARN Seris 18 winches a few years ago and now I have a use for one. I need to fab up a proper mount. I obtained a piece of 2" x 10" channel that is about 2.5" tall and is 37.625" long. I boxed...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks