Search results

  1. Stevev

    Softer suspension on M998 (? )

    Happy Monday I have a stock 1989 I was wondering if anyone has changed out there rear springs or shocks to soften the ride on the road? Thanks for any input or where to get parts to change out my stock ones
  2. Stevev

    Overheating 🥵

    Good morning and Happy New Year On my 1989 M998 my fan was always engaged I replaced my Cadillac valve and now getting 120 psi to fan and it is disengaged all is good runs great but now won’t engage Temp climbs to 240 and I still have 120 psi My sensor is also new my truck was running at 160...
  3. Stevev

    Fan clutch low psi, not disengaging

    Good morning Having a problem and at a loss on my 1989 m998 I’ve been trouble shooting a problem with my fan always engaged and have got to a point where the psi going to the fan is 30 and the psi from the rack is only 35? the power steering works great Any ideas Thanks
  4. Stevev

    Fan clutch psi

    Good morning Having a problem and at a loss on my 1989 m998 I’ve been trouble shooting a problem with my fan always engaged and have got to a point where the psi going to the fan is 30 and the psi from the rack is only 35? the power steering works great Any ideas Thanks
  5. Stevev

    Stock horn replacement

    Hey guys I ordered a new louder horn and it only has a blue power wire and the unit grounds when you bolt it in I guess the current horn has two wires with identical plugs any idea on how I would wire it so I have 24v to the new horn?
  6. Stevev

    Engine fan

    Hey Guys Happy Thanksgiving this may be a dumb question but should I be able to turn the fan blades when the engine is off? blades don’t spin when it’s off or when it’s running and engine is cold or at 160 degrees?
  7. Stevev

    Oil pressure spike

    Out and about today notice my oil pressure at 90psi when it usually runs 50-60 little higher when engine is cold if I start to unscrew wire on sending unit seems to jump around as soon as I touch it is there a ground somewhere for it? if I start the engine and turn it off and restart seem to...
  8. Stevev

    Wait light Quick blink only

    Good morning im new to this sight but have found it to be a great help thanks for all the info and posts I have a 1989 m988 my voltage reg went and was spiking 37v at times I fount this out when my wait light just did a quick blink and my truck had a hard time starting I replaced the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks