Search results

One of my perkins powered gen sets has a similar issue that I have not fully diagnosed. It will get no fuel on occasion and I have to unscrew the solenoid to get it to start them I can screw it back in once its running. I've been thinking I have a lazy solenoid as it doesn't do it all the...

I would be interested to know what you get and if you ever get any 60a connectors I'm always in the market for them. I can use any of the 4 types (power source, male or female cable, and load) with or with out contactor pins.

lol....I know the feeling. That's why I bit the bullet and went out and bought the correct crimper to build my own. Not a cheap way but it did make it easier to get exactly what I need.

How many cables do you have to spare? Are all of your cables only about 16'? I make my own but I'm just about out of the connectors and could possibly use a few more longer cables

I ended up buying a PPDU a while back and I believe I bought a parallel cable from you on fleabay. After making a couple of small changes in my PPDU I got everything up and going. I have 6 of these rigs and I'm working on getting them ready to work as stand alones but I might have an interest...

I have a few friends in the HVAC business and all of them were a little hesitant about me buying NU22 to recharge my ECU's. I ended up using R22 as we still had a couple of bottles in stock. I'm wanting to think it was something about the oil viscosity but I could be mistaken on that. I will...

I didn't make it back to my office in time today and I don't think it's a problem to mention this so......If anyone won any of these multiple lots I would probably be interested in taking one of them off your hands. Once again if this isn't in the proper place please delete

how would the power source get connected to these? as in is it wire by wire individually or does it have provisions for pre-made cables to connect the power source to it? After reading my question even I'm confused lol hope you understand what I'm angling at.

they are definitely a pretty well thought out machine. very capable for sure

Guyfang........Any idea what make or model the last bus is? At 1st glance it kinda looked like a 21 window VW but it's definitely not.

Nice looking rig!!!!

I have a cummins powered 185KW with a KATO generator on it that the engine looks very similar to. Mine to the best of my knowledge was non-military issue but it did come from a municipality so it's possible it could be either civilian or military. I bought mine a couple of years ago to be a...

NEIOWA.... You enlightened me on something, the 120000 BTU ECU's use 18" return ducts while the smaller BTU ECU's appear to use 16" return like you mentioned. I'm not sure on what BTU the smaller ducts apply to but it appears to be the models that use 1 supply duct and 1 return duct as opposed...

That does sound like a lot of work to solder them together..... Everything about these cables is expensive but the end product is very nice. You are 100% on how they go together. The pin removal tool does make it a lot easier to remove the pins if need be. I've heard of people using a piece...

I'm curious, how did that work out? I was originally considering doing this also but after a lot of reading I found mixed opinions on this. I ended up just buying a crimper (not cheap) and then the correct dies (also not cheap) as I have plans for several cables. The crimper makes it very...

I only have the connectors for sale currently. I do have a very good wholesale outlet for buying SOOW cable and the correct PICO crimper with dies for making cables as I make all of my own cables. I would be able to build cables for others in the near future once I get a couple of pending...

I've struggled to find ducts in the past. I did get lucky last year and bought 2 pallets of new 12" ducts but they are hard to find. I don't have any extra as of today but that might change shortly once I get all my systems worked out. I will keep you in mind once I know what I will have to...

If you discover anything on you heater coils not producing heat I would be curious to hear as everyone of mine I have bothered to try also do not produce much heat. It hasn't been a pressing issue for me but at some point it probably will.

just curious if there is a tachometer provision or is it possibly displayed in the multifunction display and I did not notice. I figured with the speed sensor off the flywheel it is being or atleast could be monitored. I thought is would be of interest to know if I was running at 1800rpms.

Just a quick update after several months of collecting pieces....I got all of my cables built, acquired a PPDU and the correct parallel cable. Yesterday I finally tried to run everything together to satisfy the quick load requirements to my spot welder and it did work. I just wanted to give my...