Search results

  1. Speedwoble

    New with a couple questions,

    Not really. The switch is electric, but it triggers a solenoid to increase idle speed with a pneumatic cylinder. But you said that part was working.
  2. Speedwoble

    New with a couple questions,

    If the front loader works, the power tool circuit works and you need to troubleshoot the wiring between the switch and the solenoid behind the cab. The fuse is good and you are getting power to the switch if activating the switch causes engine RPM to bump up. Pull off the terminals on the...
  3. Speedwoble

    New with a couple questions,

    The PTO does not operate the hydraulic tools. Does the front end loader work?
  4. Speedwoble

    New with a couple questions,

    Those are 2 separate circuits you are talking about. The power tools run off of the belt driven pump below the engine. I assume the loader works? If the loader works, then you need to check the electric wires between the switch on the side and the valve block behind the cab. Regards the backhoe...
103,836members
160,168threads
2,248,363posts
270online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks