Search results

NICE ! Tell me about your front wheels bro... I stuffed a BC3 Cummins rebuild in mine and drove it 1400 miles. Weeeeeeeee.....

Boys and their toys is one thing... Men and their dreams is a whole different story... (y) :cool:

I use it to bag the ladies... :cool::sneaky:(y)

Gawd that dump is nice... yep and carry a SPARE for the trailer too! these trucks are just brutally amazing pieces of history...

So long time no post. The Big Cam 3 engine got stuffed in and I did it myself sans 10 hours of the heavy stuff w/ a friend. It was a trial by fire break in. I hopped in it 3 weeks ago after hooking up to a tilt trailer w/ forklift on it and off I went. Est weight was 70,000, less than 1/2 what...

I have 2 trucks to transport. Both together are prolly under 27,000 pounds. Both are 39' long w/ a 2" space between. Max height is 10' Load is READY now... Call 626-233-1339 BRAD

You noticed! I love adding little nuggets of fun like that! learning how to draw in CAD w/ precision and getting your parts cut to perfection w/ water jet machines and laser cutters will change you life. www.sendcutsend.com is AWESOME... You send a drawing, select your material and you will...

I have it set up so I can mount an ATV winch to the bumper.... I have it, have not done it yet... It lean forward a bit and the adaptors at the bottom touch the mounts. I usually just bungie it to keep it from rattling...

Just leave it attached at the bottom and make yourself a mount at the top that attaches to the M-ABPC/PB ( Anti-BLM Protestor Clearance / Punisher Bar [Works best when greased heavily ] ) ... :cool: If you look real close you might be able to see a pulley I fabbed into mine for a small ATV...

I HAVE NOT USED MINE IN 2 YEARS AND IT IS 1300 MILES AWAY FROM ME... MAYBE THIS WILL HELP

Check FLUIDS... It's something silly I bet. Wires to hold down latches or hydraulic fluid is low.

I have not used mine in a while but I would suggest you look real hard at the wires that go to the hold downs in front to start. Also make sure it is not rusted DOWN to the frame, get a pry bar and make sure things are loose... Check ALL FLUID LEVELS as well... 98G how ya doin' buddy!

Fuel Pump install pics...

DONE DONE DONE!~ I can now say I AM DONE! LOL! New engine all DONE! Did I say DONE? Ha~! I got the fuel pump back from the rebuilders. They said of the 3 housing parts that the center? housing had a hole that was out of spec thus causing the pump to not "bounce-back" ( IE when I let off the...

So where the Power Steering Pump joins w/ the adaptor, as I said I believe I am unable to find O-Ring / Gasket #008771-026 & part #27 in pic below. I did some measuring and found two possible candidates at McMaster; https://www.mcmaster.com/9452K78/ & https://www.mcmaster.com/9452K85/ I...

In this TM exploded view I only see 2 in the stack for warm weather! In the cold weather you see 3 w/ the spacer STOWED on the outside! I bet you, if you take that pump apart, you will see you have an EXTRA spacer bolted on the outside! I see 4 in your stack! And weird spacer washers! Part 23...

Wes... Now I am confused regarding the T/C PUMP DISENGAGEMENT SPACER... ( I MAY HAVE ERR'd in this post! https://www.steelsoldiers.com/threads/artisans-m916.122713/page-5#post-1579544 SHOULD I HAVE SAID "WITH" SPACER INSTALLED? ) So as pictured in the 3rd pic down a pump disengagement...

HA~! Yep, Will said to seperate at the lube pump side too... Live and learn.

Wes, I didn't see this until now. I have never pulled the fenders, the inner sheet steel yes but fenders no. So your saying a handle makes it way easier to R&R the fenders? If so I might do your mod in case I am on the roadside someday doing DS engine repairs. I have an aircraft ladder at...

So when I removed the fuel pump, I had to pull the power steering pump as well. I removed the PS pump leaving the adaptor attached to the lube pump. ( Like the TM says to do!) The PS pump would not clear the fuel pump so I massaged it a bit and clearanced it. The PS Pump comes out from the top...