Search results

I'm in, could use some batteries

I'm in

In

In

In

Picked up my backhoe trailer this week. Now Ineed to adjust the hitch on the trailer so it rides level behind the deuce.

Rusty, any suggestions on how to do the "sipping"?

Sunday I got rid of an old pick up truck and had to move my Bronco (not running) into the spot the pick up came out of. I towed it back as far as I could with the Deuce then positioned the Deuce behind the obstacle that the Bronco had to be pulled up against and used the winch to pull it back...

Read this tread: https://www.steelsoldiers.com/showthread.php?164561-2017-vin-info-thread

Augi, I have an extra control box for the VIC 4. I could send it to you to reduce the cost on my box a bit, if it will work.

If I'm looking at your drawing correctly, one box would control 2 radios? I would be interested. I've been looking for a way to interface 2 Motorola CDM 1550 radios into the VIC-4 system.

The seller said he originally bought it for a 5 ton but it was too short by a step. It fits pretty good on the deuce. It has two hooks on the top that look like it would fit over a round bar or something.

I put in a 24v to 12 v converter then ran that to a 12v fuse panel. It really makes adding 12v accessories much easier. I did also add a master switch to the batteries as well which shuts everything down so no need to worry about drain. I mounted it right to the back of the battery box.

Not really sure what it is off of. I picked it up at a show in PA a few months ago. It looked the right height and the price was right so I bought it. It has lettering on it but the only word I can clearly read on it is "trailer".

Helped a friend move stuff out of his storage unit to his new house today. 2 loads with the Deuce, would have been many more loads with his pickup.

Scored about 30 more gallons of free fuel. A friend of mine put me in touch with a guy at the gas station he works at. He had the Diesel / Gas mix in 5 gallon buckets. Apparently putting the wrong type of fuel in vehicles happens at lot more than I realized. Might want to check with your local...

I'm having issues with the H-161 headsets where it connects to the bailout cable. I understand that this is a problem area. I even purchased new NOS headsets and bailout cables and still had issues right out of the box. It seems that they only work correctly when there is a slight pressure to...

I found some on Ebay recently.

Both radios are Motorola CDM 1550, one in VHF and one in UHF. remote heads installed on both with the main body of the radios under the drivers seat. I have the auxiliary speaker wired from the radio into the aux input of the VIC 4 intercom. I can hear the radios through the headsets. I would...

Installed the VHF in the Deuce on Friday. Yesterday I took it on a little off road adventure. Of course the Deuce was voted the coolest truck in the group :naner: