Search results

Is this the neutral bonding jumper thats disconnected from ground?. It is smaller than the wire on the back of the L0 lug .If so I leave it off for a 4 wire setup and use no ground rod at the generator

Can you supply a picture of where this is please?. Thanks

Hi. Do you have a pucture of where they are. I need to be sure i have the correct neutral wire to un bond.

Help. Can you tell me exactly where this lug is nonded please. I think i found the correct wire but not sure.

Most excellent reply sir. You have convinced me to forget automating the process and better yet stick with the mep-003A I have. It is trailer-mounted and has the ASK kit on it so it's not terribly noisy. Now all I have to do is plug it in and test the 5 yr old setup.

Looks like most of the heavy stuff is on the generator side. Been a while since I looked.

Interesting Scooby. That would be tough working with my panel I would suspect.

Thank You for the information. I was just thinking of family members switching it over, i can do it easily. Also if I was to purchase a Generac small standby propane generator say a 17 kw to power this panel would that be overkill for this panel and would a 17k run ok on my 330 gal propane...

The electrician installed the panel, I got it inspected and it has never been tested with a generator. I am looking to do that now. It's been 5 years and I want to check the wiring from house to generator but I believe it is correct at the generator with the neutral to ground connection...

Correct. Appliances are gas and ac/ heat units are mini splits in parts of the house. I only am concerned with running the well and mini splits and tv computer, fridges and small stuff. Only 2 people live here so we're good with 125 A. And thanks for looking. I got it with the Mep003 's output...

I set mine up about 5 years ago and I think I followed this or a similar thread somewhere. I just went out and looked at the generator and I have the neutral wire loose and taped off and it's in the shop so no ground rod attached. Never did. have that. I have a 4 wire #6 100 ft so cable going...

Wow, thanks for the help guys.

Where could I get one of those jacks, do you know?. I have a mep-003A with ASK on the trailer and have to use my tractor to lift it up.

Me too.

What is the "ac box" you are referring to?

Yes sirs, I did flip them. Now , who has a complete winch setup for sale for a Deuce?.