Search results

  1. mdlbldrmatt135

    MEP-016a Issues - Manual no help.

    I finally got around to messing with the MEP-016a I bought like 8 years ago. She started after a bit of work (a cobbled fuel source because of a rotten line), She runs and generates power (at least from the convenience outlets) Issues: "Kill" switch is wired backwards or rotated 180 degrees...
  2. mdlbldrmatt135

    MEp missing dataplate....

    OK, So I notice that the dataplate on the side of my MEP-016a is missing... 3 of the 4 drive screws are there holding fragments of it. here's one from another auction and you can see the plate. the void: The TM lists NSN 9905-00-254-9239. I'm not seeing anywhere, Which Generic would...
  3. mdlbldrmatt135

    To cover or not to cover that is the question....

    I'm debating about having a canvas (or rubberized vinyl) cover made for the MEP-016A I'm working on. It's going to be stored in an open air "overhang" on the side of my garage. I'n not sure if it's a good idea or not to have a fitted cover on it or just leave it uncovered.
  4. mdlbldrmatt135

    Ground rod NSN's.....

    Here you guys go: NSN, Type, Class, Size 5975-00-371-9428, I, A, 8 feet long 5975-00-296-5324, II, B, 8 feet long 5975-00-878-3791, III, B, 9 feet long, three 3-foot sections 5975-00-952-1791, III, B, 10 feet long, two 5-foot sections Type I - Auger rod II - Driven rod III - Sectional rod...
  5. mdlbldrmatt135

    4a032 Filters.......

    I've been compiling a list of Filters for the 4a032 engine: so here we go: Cartridge style: Baldwin PT48 AC Delco PF-140 Purolator H20143 WIX 51514 Napa 1514 Fram C1101PL Spin on: Baldwin B1413 WIX 51215 Napa 1215 21215 Fram 6065A 6022 There are more that...
  6. mdlbldrmatt135

    MEP-016a making it easier to move.....

    So I've got the Mep-016a... it's a bit of a bear to drag around at 275# trying to figure out a way without making too many mods to it to make it easier to move... my thoughts: bushings thru one of the cross tubes w/ and axle & tires and some "wheelbarow" style handles on top Or: a full...
  7. mdlbldrmatt135

    Removing the packet envelopes

    OK, so last night I decide it's time to dig the MEP-016a out and give it the lookover I've been postponing since I got it home. Some Yeahoo stuck 2 or 3 of the "packet envelopes" the ones for shipping invoices right on the operationg dataplate..... What's the best way to remove the...
  8. mdlbldrmatt135

    Wire feed welder (review I guess)

    With it getting harder and harder to sneak small projects into work to have the welders fix 'em... I decided to bite the bullet and get a small 110v welder. After looking around and comparing all the features I decided to go with one from Northern Tool. Northern Industrial MIG Welder &#151...
  9. mdlbldrmatt135

    Mechanicsburg Loadout help?

    I won 2 lots last week, 1 EUC and 1 non. Unless by some miracle I probably won;t see the EUC in time to pick both up. Is there anone that might be able to pick up and store the non euc lot for me, so I can make the 5 hour trip only once? Here's the lot info: 4310 - Compressors and Vacuum...
  10. mdlbldrmatt135

    Columbus pickup help?

    I'm watching a couple auctions ending July 27th, and I'm not sure if I'll be able to get time off to pick them up during the week. Is there anyone (preferably north or east) of Columbus that might be able to pick them up and store them till a weekend when I'd be able to come out for sure...
  11. mdlbldrmatt135

    Lowboy in Fla!!

    xxxxxxxxxxxxxxx
  12. mdlbldrmatt135

    Cherry Point????

    Anyone near there? There's a few lot's My buddy & I are keeping an Eye on........ Hoping someone would be able to get the stuff and send it out...........
  13. mdlbldrmatt135

    Atleast they warn you.........

    http://cgi.govliquidation.com/auction/view?id=1472509&convertTo=USD Low Level Radiation..............
  14. mdlbldrmatt135

    MEP-018a generator

    Would these make a Good "emergency Backup for around the house???? I see a bunch out at Norfolk on Gov't Liquidation............
  15. mdlbldrmatt135

    HMMWV Trailer info??

    Anyone have any info on the Packhorse trailer for the HMMWV?? Thread in Trailer Forum: http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=16437
  16. mdlbldrmatt135

    New to group.... Looking for Info

    Just registered. I'm a Model builder looking for a little more info on the Packhorse trailer. I have the Brochure from Oshkosh.... and Silver Eagle /wenzalu are no help whatsoever...... Any info would be appreciated...............
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks