Search results

  1. D

    Grote Solid State Flasher Install

    I am planning to install the Grote 44010 flasher unit in replace of the regular one. Has anyone installed this one before. Just want to make sure I wire it up right when it arrives. Attached is the wiring schematic for reference. Thanks. Sent from my SM-N950U using Tapatalk
  2. D

    Frag 5 Steel Gauge

    Anyone happen to know the steel thickness of the frag 5 doors? Sent from my SM-N950U using Tapatalk
  3. D

    Starter Solenoid Wiring

    I just picked up a new starter solenoid from Texas industrial electric and swapped out the old solenoid with it. When I installed the starter back into the humvee and turn the switch to RUN, I get power lights but when trying to start it.... nothing. Doesn't make a sound, so I contacted Texas...
  4. D

    3L80 Rattle

    Not sure if you can hear it, but I have a rattle in one of my 3l80 transmissions. Sounds like its something internal, but it drives fine. The rattle is only at certain speeds and throttles, and it gets annoying. This tranny had this rattle when I got it, so I rebuilt it and it still has the...
  5. D

    Alternator undercharging?

    I put in a new Delco 21si alternator in one of my 6.2 M998's and it's been running fine for 5 months. Then last night I noticed the headlights were very low, and i looked at the voltage gauge and it was all the way to the left (red). Went straight home and took a reading with my voltmeter...
  6. D

    Delco 24v alternator bracket modification

    Anyone interested in sharing how you modified your bracket to seat the Delco 24v alternator? Looks like the easiest way is to cut a notch out the mounting bracket... DELCO 24v Back Pic DELCO 24v Bottom Pic Thanks!
  7. D

    Water / Solvent CARC texture

    Question for the people who have used the water and solvent based carc paints. Is the water based actually smoother than the solvents? I read that on the Sherwin-Williams website, and having trouble talking with someone who has actually used both there. I like the rough sandpaper grit finish...
  8. D

    Cummins QSB6.7

    Anyone in here ever fit a Cummins QSB6.7 in their m998? I am eyeing a few for sale and wanted to get some opinions on it, if anyone has converted to a QSB. Thanks
  9. D

    Paint cost

    I was wondering if anyone who has had their m998 blasted to bare metal and repainted stock, could share what it cost. I wouldn't mind having a rough idea before i have it done and get prices. Thx.
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks