Search results

  1. F

    M38A1 cam gear -no timing marks!

    Help! In my haste to disassemble the engine on my '67 CDN2 M38A1 I didn't check to see if both gears had marks on them. Crank does but the fiber cam gear does not. Is there a way to determine the proper alignment by counting teeth from the centerline of the keyway, or some other little trick...
  2. F

    WWII Backpack Generator

    I picked up a world war two backpack generator over the weekend, GN-51-A, 300 watt A/C 120-240v powered by a 2 cycle Jacobsen engine, I know that this type is relatively common, so why can't I find any info on it? If anyone knows more about them, please let me know, manuals would be great, also...
  3. F

    carb and govenor question

    I started to rebuild the carb on my M37B1 this past week and have two questions. First, what is the paint that they are covered in, it strips off easy, but now I'm wondering if I should repaint it when I'm done, anyone have any ideas? Secondly, and more important, when I took the govenor...
  4. F

    WM-46/U Special Purpose Cable

    I was wondering if anyone has any of this special purpose cable from the GRC series radios. I have been unable to locate any online. Hopefully someone will have some that will be attending the Aberdeen show. Thank everyone. Please message me if you have any ideas. Paul
  5. F

    MEP 018A worth rebuilding?

    I have a question for all of those wiser than me. I have an MEP 018A 10kw genset that has a burned out stator winding. The rest of the generator is in excellent shape, engine runs great, voltage regulator works, and it even has decent paint! However, I pulled the stator out and took it to...
  6. F

    solid state vibrator replacement

    I was wondering if anyone knows of a simple circuit that would replace the 24 volt vibrator in the GRC family of radios. I tried finding a schematic through a google search and got really discouraged. You'd think something as simple as a transformer driver would be easy to find the plans for...
  7. F

    Cold Start Aid

    I picked up a unit at an auction two weeks ago and was hoping someone has info on it. The only tag on it says Cold Start Aid made by the perfection stove company. It contains a 28 volt Homelite generator, gas fired heater and space for 4 , I presume 6 volt batteries. Also knife switches to...
  8. F

    older generator magneto

    I picked up a generator today at an auction. It's a 5KW with a continental Y69 water cooled 4cyl engine. Unfortunately I can't find a tag with an M- number on it, only FSN-6115-628-1243. The engine is missing the Mag, and I was hoping someone might know what model and make of magneto it...
  9. F

    10 KW genset regulator

    I'm in the process of getting my generator back among the living and among other things cannot get it to generate. If I press the field flash switch I can hear the engine bog down, but as soon as I let off, the engine bounces right back ,and no voltage. Would this be likely caused by a bad...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks