• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. dstang97

    Help needed with CUCV charging system to reverse 12 volt conversion

    Too bad you are not closer. I have all the parts you would need to fix it. Was your wiring hacked up?
  2. dstang97

    M1009 Lights Work, Won't Start--Nothing when you turn key

    I’m leaning towards bad ignition switch. Gonna have to pull out my meter and spare parts. I have no headlights, no starter, new batteries, right connections, good grounds. I am getting power to the 30 amp fuse. I’ll look into it tonight but this one has me stumped
  3. dstang97

    M1009 Lights Work, Won't Start--Nothing when you turn key

    Having the same problem now
  4. dstang97

    Restoration and repair literature for Chevrolet K5 Blazer (M1009)

    I have that exact book
  5. dstang97

    M1028a2/3 part number needed.

    Lol i figured they were rare.
  6. dstang97

    M1028a2/3 part number needed.

    Yes
  7. dstang97

    M1028a2/3 part number needed.

    Can someone help me find the part number for the 1” spacer that’s on the Dana 70 rear axle? I can’t find it anywhere. Also anyone have a pair?
  8. dstang97

    Bus Bars Configuration Help PLEASE

    Also you created a dead short. The + of the rear battery gets hooked up to the bus bar not the negative.
  9. dstang97

    Bus Bars Configuration Help PLEASE

    Your bus bar does not have 2 voltages. It’s 24v the way you have it hooked up. The 12v wire that goes to you black diamond post needs to go to 12v. It’s hooked up to 24v now.
  10. dstang97

    DENTON NC Buy/Sell Thread 2022

    I will be there Saturday. I have tons of cucv stuff i could bring. Pm me
  11. dstang97

    CUCV Master Keyed?

    What ever it costs to make a key and ship. Just helping a fellow cucv friend.
  12. dstang97

    CUCV Master Keyed?

    I’ll sell you a key
  13. dstang97

    M1009 Fuse Box Issue 30AMP Main Lighting Fuse

    Wiggle the fuse .
  14. dstang97

    Finding out year of truck

    I ended up just putting down 85 for mine. It is just a regular m929
  15. dstang97

    1986 CUCV Gen 2. Right side isolated ground alternator

    I have good used ones.
  16. dstang97

    Very strange gen 2 problem

    UPDATE: Ok guys I figured it out and I’m pretty embarrassed but oh well. The first thing you should do is test your fuses. And I did. I failed to see one was missing completely and did not realize it until I really stuck my head underneath. It caught my eye as I was plugging in my gp card. The...
  17. dstang97

    Very strange gen 2 problem

    the fuse at the bottom is 24v
  18. dstang97

    Very strange gen 2 problem

    There is not much heat at 3 minutes of starting.
  19. dstang97

    Very strange gen 2 problem

    Update I switched out the gauge cluster. Then put in a 4th alternator. Still no change. Still getting 24v to the fuse panel. At this point the only thing that has not been changed is the interior harness. After 5 minutes I’m still loosing voltage guage, 2gen light and low coolant light. Then...
  20. dstang97

    Very strange gen 2 problem

    I switched 2 rebuilt ones and they all are doing the same. Even had them tested.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks