Search results

  1. M

    M911 HET winch conversion

    Hello guys, I have found some Braden winches from a M911 HET , they are 45k rated Braden hydraulic winches , from a quick look seems that the hydro motor can be removed to convert them for PTO...Anyone familiar with these winches ?Are they any faster than the older regular Garwood drag winches...
  2. M

    Wrecker rear drag winch brake drum

    This sounds good , but the brake drum is cast iron and I do not know if the sleeve is doable ? These things are almost impossible to find !!!
  3. M

    Wrecker rear drag winch brake drum

    Hello guys, I have six 45k rear winches for rebuild ,all the brake drums are badly pitted , I have clean one on a lathe but I have to remove at least 2mm from it to have a nice smooth surface.The wear limit is very tight on these (from 5.503" to 5.497")...So can I still use them ? Thank you!
  4. M

    Spicer 3053a seals n gaskets

    Maybe anyone has this gasket and can measure its thickness ? Thank you!
  5. M

    M62 rear winch disassembly woes !

    The pullers used to remove brake drum : At the left is 683/130 that was damaged (threads on puller body) from excessive pressure , worth to mention is that this puller has remove easily two brake drums from 45k winches in the past and also from 20k and 10k winches... At the right is 683/250 the...
  6. M

    M62 rear winch disassembly woes !

    Update ! I have to fabricate a simple puller to be able to pull the drum off the shaft point is to have it centered to the shaft during removal (pictures will follow), good thing it that the shaft is not damaged only rusted ! And about the brake that was stuck solid to the worm shaft , Kroil ...
  7. M

    45k wrecker rear winch worm shaft removal

    Thank you NDT! Use soft head hammer to tap worm shaft :mrgreen: Yeah sure when it was new maybe...
  8. M

    45k wrecker rear winch worm shaft removal

    Hello guys, I am trying to remove the worm shaft , I have try to hit it with a 4.5kg hammer (wood block used between shaft) but no go...I have read both TMs and they suggest different ways to remove the worm shaft :roll: Can anyone please share his own experience ? Also can anyone suggest a...
  9. M

    M1008 seat belt floor mount base bolt size ???

    Thank you all for your great help !!! [thumbzup] I hope to find them available here as they are not a hard to find size...One more question : are 10.9 grade bolts suitable ?Also seems too much to ask someone to ship you two bolts overseas... Happy new year !!!
  10. M

    M1008 seat belt floor mount base bolt size ???

    nsn 5306-01-157-3279 , gm 471083
  11. M

    M1008 seat belt floor mount base bolt size ???

    Can anyone please share the specs of the bolts that secures the seat belt mount to the floor under the seat ? Both are missing on my truck ! Socket size , length and thread it would be awesome !!! Happy new year guys !
  12. M

    weird no start issue (fuel related)

    I hope so as every time I would like to work on the 08 something happens !!!
  13. M

    weird no start issue (fuel related)

    I have crank open the 19mm nut at the #1 cylinder...Glow plugs are new and I will have no problem to remove them as suggested... @corelokt can you please elaborate where exactly this screen is located ? Thanks!
  14. M

    Wrecker rear winch worm shaft interchangeability and seals source...

    The worm shaft is toast for sure (from pitting) as this winch was drained from oil and sit for a loong time outside, it will eat the brass gear under load soon , and this winch it will be going to used almost daily... Your thought sounds good Jon...Now where I will find an M125 parts TM is...
  15. M

    Wrecker rear winch worm shaft interchangeability and seals source...

    Hello to all forum members, I have tear down an M125 front winch (same as M543 wrecker rear 45k winch) this one is made by Garwood, the big brass gear is in very good condition , sadly the worm shaft is pitted in the contact area and also at the seals areas so it is junk.I found an very good...
  16. M

    M62 rear winch disassembly woes !

    Here is the shear pin guys...
  17. M

    M62 rear winch disassembly woes !

    Hello all !!! I am trying to remove the drum from an M62 wrecker rear Tulsa winch...I have remove several in the past and all came with almost no effort... But not this one...It is so badly stuck that after I have hit it hard with a large hammer (wood block between drum!) it moves very slowly...
  18. M

    LeRoi Mack M123

    No bids at all guys !!!
  19. M

    Winch brass gear is black !

    My bad my last post is a bit confusing , I was able to clean all this black sludge from all the housing with diesel fuel except the brass gear...
  20. M

    Winch brass gear is black !

    Hmm , I would say no as all the housing inside is covered with this black sludge...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks