Search results

  1. A

    FLU419 transmission question

    SUCCESS!!!! Got the bushing installed with some good grease, slid the gearshift back in place and BINGO.....she shifts like BUTTA BABY!! 1st through 4th feel like silk. It's crazy that the bushing would disintegrate in 3000 miles but that's what happened. Thanks to everyone for the...
  2. A

    FLU419 transmission question

    coolhandmatt......you were right on the money! I decided to pull the gearshift out and see what that bushing looked like and found a bunch of little bits (see picture). I was amazed at how difficult it was to pull the gearshift out of the hole, but when it came free it popped right out...
  3. A

    FLU419 transmission question

    So I had a little time last night to mess around with it and I can't see how it would be the bushing (unfortunately). Maybe I'm thinking about it wrong though......I would assume that if the bushing is worn and allowing the gearshift to sit too low to properly engage the fork, I should have...
  4. A

    FLU-419 - Removing attachments - Experiance desired & Legal Road Stuff.

    I took the loader and backhoe off my 419 last fall and drove it to work a few times a week over the winter. It made a HUGE difference without the weight of the loader and backhoe. I had no problem driving it 52 mph to and from work and it felt very safe and stable. I'll be driving it to work...
  5. A

    FLU419 transmission question

    coolhandmatt.......thanks for that info!! I just logged in to bump this thread to find your post with some excellent information. I will try that in the next couple days and see if it helps. It is a really strange scenario.....the gear shift just doesn't want to go in to 1st or 3rd. Luckily...
  6. A

    FLU419 transmission question

    So I put 1.5 pints of gear oil in the transmission and it doesn't seem to have improved my shifting issue. Anyone else have any suggestions or experience with this issue? It just won't shift in to first and third. If I push pretty hard, I can get it to ALMOST engage in to first gear. I can...
  7. A

    FLU419 transmission question

    FYI for any other SEE owners.....the drain/fill plugs on the transmission are 9/16" allen. I didn't have one that size, so I made my own out of a bolt with a couple nuts welded to it. Worked well. I stuck my finger in the hole (why can't they make it so you can see in there???) and the oil is...
  8. A

    FLU419 transmission question

    Soooo, I finally had a chance to spend some time on this, and I already have a question. The largest metric allen wrench I have in my set is a 10, and it is WAY too small for the transmission oil fill plug. I realize I need to buy a larger allen wrench, but does anyone know what size the drain...
  9. A

    FLU419 transmission question

    I haven't had really any time to check into it unfortunately. I will check transmission fluid level this weekend. My unimog still drives fine and has no problems with the transfer case. It just feels like it doesn't want to "engage" in 1st or 3rd gear. If I hold it in first it moves fine...
  10. A

    FLU419 transmission question

    I've noticed that my FLU419 is getting harder and harder to shift into 1st and 3rd gear. It doesn't seem to go completely into those two gears....it will pop out if I don't hold the gear shift. Is there a shift fork or some sort of linkage that can cause this? I drive the thing quite...
  11. A

    419 Hydraulic Oil question

    My small hydraulic tank is low (yes, I have a few leaks I need to fix) and I need to get more oil. I've looked at the lubrication manual and it calls for OE/HDO-10. I've searched online and on this site and I believe it is SAE 10W hydraulic oil. I then searched and found what appears to be an...
  12. A

    Need front loader hydraulic valve for my FLU419

    Yep....I have the entire manual. That's where I got the NSN number. That one for $75.....I bought it, only to have the seller say that he couldn't find it in his new warehouse. I've been asking him for the last week if he found it and so far no luck. I was hoping that someone would be...
  13. A

    Need front loader hydraulic valve for my FLU419

    I've searched EVERYWHERE and can not find the valve I need for my 419. I actually only need the small square detent spring cover on the back of the valve body, but I'm assuming I'll need to purchase the whole valve to get it. Here is a picture of my valve unit....the part I need was replaced...
  14. A

    FLU419 SEE HMMH HME Owners group

    FNG checking in. Purchased my 419 2 months ago and am loving it. I'm having one **** of a time finding a part for it though....any chance someone knows where I can get a part for the hydraulic valves for the front end loader (the valve body behind the cab)? Here's a picture of mine (kinda...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks