Search results

  1. twisted60

    '86 M998 Humvee issue with headlights and turnsignals

    First I did a search, I found lots on turn signals but did not find any on my issue. So here it is... I have LED lights all the way around and an LED bulb in the turn signal switch. Turn signals work good until I turn on headlights, then no more turn signals. Headlights on, turn signals not...
  2. twisted60

    LED issue

    Stumped, I just installed LED brake and turn signals in my '86 M998 but,,, when I have my head lights on the turn signals don't work. With headlights off everything works perfectly. I replaced the bulb in turn signal switch with an LED, I have LED marker lights, LED headlights, LED brake and...
  3. twisted60

    MTR vs MT tire mixing

    I'm putting a new set of MTR tires on my HMMWV, I noticed on the side wall of the MTR's it says not to mix with MT tires, anyone know why ? I always heard not to mix bias ply and radial ply tires but the MT's and MTR's are both radials. I am planning to keep my best MT tire as a spare and put my...
  4. twisted60

    Cr-2696 tsu vs cr-2696a tsu

    I've run searches here, google, nsn and as far as I can tell the CR-2696 TSU is compatible with the CR-2696A. Can anyone confirm these are interchangeable. Thanks
  5. twisted60

    HMMWV tires, runflat required or not

    I'm about to put new tires on my HMMWV, is it a good idea to put the runflats back in ? Or can I run the tires with out runflats ? I don't see running low tire pressure in my future, mostly just drive to events and back. MTR tires going on 12 bolt rims, M998 1986. Thanks
  6. twisted60

    Check your Feedthru Terminal and Ground

    I was rolling around on the creeper yesterday and found an issue, truck started fine (only drove in and out of garage, still waiting on SF97). Anyway I found that the Feedthru Terminal , TM 9-2320-280-24P-1 figure 69 *a from battery box thru the...
  7. twisted60

    HMMWV recovery U-Haul nightmare

    Got her home today after a uhaul nightmare. So long story short 3 uhaul trucks later I got her home. Started at 0600 morning of 7 dec and ended 0020 8 Dec, only a 600 mile round trip... She's still on the trailer until sun up, then I'll move her off the trailer.
  8. twisted60

    Recognizing: ODFever & Signalcorps

    Sending out a thanks to ODFever and Signalcorps for the great Veterans Day Parade in Orlando. Even with a little rain it was a great day.
  9. twisted60

    Coolant Filter Yes or No

    Any one tried to mount a coolant filter in their HMMWV ? I search but many find for the 5 tons filters, was wondering if it's possible and if it's worth it.
  10. twisted60

    Seafoam Trans Tune

    Just curious, has anyone used SeaFoam Trans Tune in the HMMWV transmission ? I am still waiting to pick my HMMWV up and as I'm new to HMMWV's I'd rather ask than make a big mistake. I see lots of videos of SeaFoam in Fuel, Engine and Transmissions but not in a HMMWV, so has anyone tried it and...
  11. twisted60

    Anyone translate this

    I just got a picture from my M998's overhaul at tag, however I am stumped, I assume it is the Maine Facility, it has a Maine sticker on the dog house, however sticker is White State with Black lettering, others I've seen were a Black State with white lettering, Not a big deal but what has me...
  12. twisted60

    Civi Alternator for M998

    Has anyone tried to mount a civilian Alt in a M998 ? I put one in my M923A2, was just curious if anyone had done it in a HMMWV.
  13. twisted60

    Stereo Installed in M923A2

    About 90% finished with install, bought a low cost radio and speakers to test out a concept and see if I like the location and function. Built an overhead and relocated my dome light, installed "double din" radio and 2 6x9 speakers. Looks good to me, just need to install a 24v to 12v converter...
  14. twisted60

    M923A2 Door hinge adjustment

    Need help to "align" door. Yesterday I pulled the drivers side door to fix a broken hinge bolt that froze in the hinge. I had to take the hinge to a local welding shop for tooling to pull stuck bolt, all went well and I put everything back together and hung the door but now the bottom rear of...
  15. twisted60

    How many vents on M923A2

    Looking for number of vents on M923A2, so far I've found 3 (1 on each axle) are there others I've missed ? Maybe on the transfer case or transmission.
  16. twisted60

    923A2 not building any air

    Need help, I've found plenty of issues where air builds up to +/- 60psi but in my case it does not build up any pressure. I can service the tanks from an external source, I do not hear any air leaking, truck drives normal with each application of brakes bleeding down the air as normal but no air...
  17. twisted60

    parking brake light flashes

    So had some free time and got started on a few projects for the 5 ton, 1st issue was to figure out why the failsafe horn would not stop squawking, I hit the TM's and tried my best to follow directions but coming from a "I don't need directions" background I had a little trouble. First issue I...
  18. twisted60

    Change my Mushroom Cap

    I have seen post with pictures showing a cone shaped air intake pre filter, does that replace the mushroom pre filter intake ? If so anyone know where I can find on to fit on my M923A2 ? The cone shaped cap looks (to me) to be a much better looking unit than the standard mushroom cap.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks