Search results

  1. Reworked LMTV

    M1088 camper conversion

    Nice welds.
  2. Reworked LMTV

    M1088 camper conversion

    I need a mag drill. Seems like one could make one.
  3. Reworked LMTV

    LMTV Transmission Issues

    Where there is a will, there's a way!
  4. Reworked LMTV

    M1088 camper conversion

    Thank you I appreciate the help!
  5. Reworked LMTV

    M1088 camper conversion

    Did you use 3/16 or 1/4" box beams?
  6. Reworked LMTV

    M1088 camper conversion

    Just curious what you paid for the large box beams. I need to plan my budget.
  7. Reworked LMTV

    LMTV Shocks Absorbers

    Can you provider more specifics on these shocks? Thank you.
  8. Reworked LMTV

    Have you installed 3.07 gears in your truck? Kindly step in I have something to ask

    On a 6x6 you have to get psyched up and prepared for the middle chunk swap. Need solid prep to prevent sudden death by chunk. Large trans jack needed or gantry. Locker will be placed in middle chunk. Have 2 lockers.
  9. Reworked LMTV

    Have you installed 3.07 gears in your truck? Kindly step in I have something to ask

    Crickets for a reason. Have not done mine yet. The dry run does not require them. More important things were done like: All silicone hoses replaced Radiator flushed Thermostat replaced ALL fluids in engine, trans, diffs with synthetic Driveshafts balanced U Joints replaced AC installed All...
  10. Reworked LMTV

    Have you installed 3.07 gears in your truck? Kindly step in I have something to ask

    DiverDarrell was his screen name on here.
  11. Reworked LMTV

    Winter is coming... Ether start questions!

    There was a discussion of starting a fire under the truck a while back : )
  12. Reworked LMTV

    Got driveshafts balanced yet? Otherwise, it's like a grenade ready to go off at any time.

    I was watching a 4x4 program where they were using a special u joint with twin u joints in the same unit to overcome angulation.
  13. Reworked LMTV

    Got driveshafts balanced yet? Otherwise, it's like a grenade ready to go off at any time.

    I would say that keeping the grease zerks always greased would likely reduced the wear on the yolks and other parts. I would use synthetic since they tend to be more tacky and are not as likely to get rinsed out.
  14. Reworked LMTV

    Got driveshafts balanced yet? Otherwise, it's like a grenade ready to go off at any time.

    Everyone was a Newbie themselves once. No one is pre-programmed at the factory. It is a honor to teach. Contrasting opinions are ok if done respectfully.
  15. Reworked LMTV

    1078 LMTV A0 windshield wiper

    Silicone blades are not cheap, but well worth it in the long run.
  16. Reworked LMTV

    1078 LMTV A0 windshield wiper

    I have not seen the rock hard plastic issue with any of my vehicles. I have however seen the Southern sun destroy rubber blades though. This is why I went to silicone blades. They will outlast rubber ones 10 to 1.
  17. Reworked LMTV

    Just painted my 1083 camper with RAPCO 383 GREEN

    How much does the Core 10 box weigh?
  18. Reworked LMTV

    1078 LMTV A0 windshield wiper

    Highly recommend silicone blades and Rain-X when you redo it.
  19. Reworked LMTV

    Just painted my 1083 camper with RAPCO 383 GREEN

    Nice bug out build!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks