Search results

  1. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    I figured I would revise this and post what I ended up doing... I had the original 4-bolt engine completely rebuilt. Ended up going with a 50s pulley so it does not have the hand crank pulley assembly anymore. I’m ok wit that and excited with the build! Sent from my iPhone using Tapatalk
  2. C

    Aftermarket wheels

    Hello all - it has been a while since I was here now that my truck is getting close to being ready to run I am revisiting the tires/wheels situation. Does anyone know of a modern steel rim that will fit the CCKW/CCW? We are using this for promotional use for our business so I am not...
  3. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    The guy I got my donor motor from has the flywheel for the engine. Aside from counting the teeth is there any way I can determine this from the flywheel casting? They are both 14” flywheels Sent from my iPhone using Tapatalk
  4. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    Got it ok. I think I am going to use the smaller flywheel from the 50s truck if I can get my hands on it and have a machine shop transfer the ring gear over Sent from my iPhone using Tapatalk
  5. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    Hey guys - can u use a flexplate in there instead of the flywheel being a Manuel transmission?? Sent from my iPhone using Tapatalk
  6. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    It is a flywheel. Sent from my iPhone using Tapatalk
  7. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    Is redrilling it safe? I have heard mixed things lol Sent from my iPhone using Tapatalk
  8. C

    Well shoot! 6-Bolt vs 4-Bolt Crank/Flywheel

    Looks like my lack of research is going to bite me. I bought a used running GMC to 70 engine to swap in my CCW. However the new engine has six bolt crank connection, and obviously my CCW original motor has a four bolt connection. Is there adapter that can be used? Am I host? Help! Sent from my...
  9. C

    Part numbers

    Thank you!! Sent from my iPhone using Tapatalk
  10. C

    Part numbers

    Looking for part numbers for the following: - 270 pilot bearing - CCW throwout bearing - CCW damper plate - CCW clutch pack - exhaust manifold and intake gaskets Sent from my iPhone using Tapatalk
  11. C

    Removing bell housing from block

    Looks like I need to remove the clutch plates to access the interior bell housing bolts from the block. Motor is seized any ideas how to access these bolts? I can’t spin the flywheel to access the other bolts on the clutch plates. Sent from my iPhone using Tapatalk
  12. C

    Ccw

    Nice - that’s what we have prepped so far, radiator is out, all externals disconnected. So far I just need to remove the starter linkages and clutch assembly. I guess I was just worried because I have my donor motor and when I used the picker to remove it from my pickup truck we could only...
  13. C

    Ccw

    Hey guys! Ok well I found what I expected to be a CCKW and it is actually a CCW. I can see some yellow paint underneath but the cab interior and engine are green. I can’t tell if the thing was used for military reasons or not at this point. With this being said I have a donor motor to put in it...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks