Search results

  1. M

    Top 3 plates, on top of bows, m1102

    Thank you very much for taking those measurements!
  2. M

    M1101/1102 top bow plates (there are 3 of them)

    Looking for the top bow plates, technically I only need the back 2, already have the front one. 12470991-1 and 12470992-1 Or 12470991-2 and 12470992-2
  3. M

    Top 3 plates, on top of bows, m1102

    Your reply is much appreciated! That's kind of what I was thinking. I will go post a WTB add in the off chance some one might have them, but it think they are not very common. Yes, if possible I would greatly appreciate the measurements of the rear 2 plates. I believe I had read somewhere...
  4. M

    Top 3 plates, on top of bows, m1102

    Working on getting a canopy for my 1102. So, I have the bows, brackets, nice tarp and even one (the front) of the 3 plates. My question is, were the plates added later.? The bows I got on a kit off another trailer, are not drilled for them... I did end up finding the front one on auction site...
  5. M

    MEP-802A/803A S1 Master Switch Source - Electroswitch

    I am late, but will take one if one falls through. Thanks
  6. M

    Soften M1123 suspension

    So which coil overs did you go with? I went with 1000# springs up front, but with a GMV bumper and a Sherpa winch, it's sitting about 1.5" too low. Rides great, would like it a bit higher though. I know I can do the 1200# winch springs, but was curious about your set up.
  7. M

    Isuzu powered Drash 5 pin connectors

    Thank you for pointing that out!! Actually seller does have a cable I could use, but it $400. A bit more than I would like to spend... https://www.ebay.com/itm/203148314424
  8. M

    Part Source for newly adopted 803A?

    Excellent, I got it producing at the lugs! It was a sticky, corroded X/Y circuit contact. I took it out, cleaned it up and made sure it snapped shut with 24V. Re installed and it seems to be working great so far. I will do further testing. Thank you again to everyone for the Help!!
  9. M

    Part Source for newly adopted 803A?

    Ok, had time to update tests. Just to summarize, new to me 803A, Produces 120V at courtesy outlets, panel gauges show appropriately selected voltages, (240 or 120), but no power at the lugs. AC interrupter switch does not light up. Battleshort lights up, but no change to interrupter switch...
  10. M

    M103A3 power plant replacement lens

    Thank you, I have bought from Adam before. I think he might have actually just found the lens for me. Thanks again
  11. M

    M103A3 power plant replacement lens

    Are these standard lenses? They look different than my Hmmwv ones.... Would anyone have a source for the lens? (Body is Metal)
  12. M

    Isuzu powered Drash 5 pin connectors

    I tried deleting the other one this morning, it wouldn't let me do it!
  13. M

    Isuzu powered Drash 5 pin connectors

    Does anyone know where to find both M and F version? Or perhaps the model number of the connectors?
  14. M

    Source for #10-32 x 1/2 SS flange heads?

    Thank you! You are awesome! Called back Fastenal and ordered 200! Thanks again to everyone!
  15. M

    Source for #10-32 x 1/2 SS flange heads?

    Would you have a part number? The rep at the store looked it up, said he can order me 100 for $162... Seemed a bit excessive.
  16. M

    Source for #10-32 x 1/2 SS flange heads?

    Does anyone have a source for these? (outside sheet-metal MEP802/803 I believe and more) Amazon has some but they are serrated and not exactly cheap... (https://www.amazon.com/gp/product/B00FFE8D5U). They also have the correct ones, but in packages of 2 or 3,000...
  17. M

    Towing Drash Trailer home

    Thank you! That's an excellent idea! Any idea how I can find a contract number? I have a UIC number, NSN and Serial number. Trailer is a HP-4DL (working on Plan B right now.. I do have $500 worth of RV/trailer tow coverage... Considering it's close, that should get it mostly home. I am...
  18. M

    Towing Drash Trailer home

    I know my 24 bolt 37" Hmmwv runflats are about 170lbs a piece. I have two if those loose. Any idea how much a 12 bolt 37" runflat weigh? I know they are less, but how much? Figured, 3 tires would work... For sure! My schedule doesn't always let me get away and play over the weekends, but I...
  19. M

    Towing Drash Trailer home

    Coug, you're the best! Thank you!
  20. M

    Towing Drash Trailer home

    That answers that!! Thank you
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks