Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Just lost power and have had the 803a running for around an hour. Went out to check and smelled fuel. Opened up the dead crank side door and noticed fuel dripping off the front of the engine. Any lue of what I need to fix.
Sent from my iPhone using Tapatalk
So we’ve been running the generator 7 days now. I shut it down on Wednesday. I’m at work and power came back on. My wife attempted to shut down generator and nothing would work. Neighbor came over and pulled this plunger out the solenoid. What’s my fix. I’ll be home in the morning to take a look...
Well Ida is coming and found this leak after running my first full load on the generator yesterday. It’s a small drip out this rubber cap. Please help
Sent from my iPhone using Tapatalk
Finally got to install my wheels/castors for my 803a. Purchased from Northern Tool Online. Heavy duty 5k lbs capacity that will not get flat spots. Had to use some angle to widen the base for the swiveling casters. Was easy to push even up a small grade alone. Ran my unit with the wheels locked...
So I have a 803a that I’m doing all my install work. I have worked as an electrician helper in a refinery and have a good understanding of what I need to do. I purchased Generac all in one wire 100’. I have conduit run from one building to another underground and then to my panel. I purchased a...
Generator will not start. Checked Voltage on both batteries and it’s saying 14v when they are connected together. Pulled the batteries off and getting around 13v on each battery. Put batteries on charger separately and topped off. Both showing 13v. Hooked back up together on generator and still...
Got the genset today. Came with the Jerry Can /55 gallon drum connection, slide hammer and strap wrench. Is it normal for these to come with these accessories?
Sent from my iPhone using Tapatalk
I just purchased a 97 mep -803a. I will be hard wiring it to a ATS for my 200a main panel. The generator will need 100 feet of cable to the ATS. These are my questions. Do I need a breaker at the generator location upstream of the ATS? If so what amp rating? What size wire do I need to run for...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!