Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Afternoon,
Here is an 802a that is starting and suddenly stopping after a few seconds. Attached is a video for reference.
I am posting for advice/suggestions from experienced members - on which of the (7) corrective actions I should begin with (as per the -24 TM manual/ 2-16). Maybe save an...
hello , I’ve had this 831 sitting for a few years (2) now. I have Fully charged batteries, the emergency stop pulled out, the DC breaker pushed in
but it has no power at the panel.
I tested S1 (shown in the photo )
it’s reading 8.56 . I’m not sure If thats normal? what other connections can I...
So I took the top off and replaced the return an other fuel Lines going to the pumps . replaced the rubber boot on the fuel stop solenoid . brand new batteries I tested on an 803 . But this unit isn’t firing up . Below is a video . Do you’ll see anything wrong?
I am thinking about purchasing an MEP 1040 from a local guy. The control panel screen reads:
Fault : 1433 local E-Stop
warning 365 (if could be 366 the photo is super blurry) maintenance item is active
Genset Mode : Emergency Stop
I scoured through a few manuals but I was not able to...
Has anyone tried these fuel solenoids from eBay ? They are Everywhere (coming from China I believe)
OR even better , is there a place I can order a New boot that will work ?
pics attached .
MEP803a new to me, is leaking diesel. I filled with a little diesel (all I had on hand)
hit the dead crank switch, turned the master switch & it runs nice . except it was covered in diesel after I turned it off. (oil filter side only)
I plan to clean her up and pinpoint the leak, thought I’d...
New governor controller installed , cracked up manually no problems . Ran perfect yesterday.
today - attempted to start manually again, and would not crank
so I added a little diesel , and battery’s . Now will not start , just clicks . Video link below .
-emergency stop pulled out
-Circuit...
Figured id post this in generators. Since the 8 pin came with an MEP. Can someone please explain the uses, differences and specs between these two types of cables; aside from male female. Thank you.
Currently running 22.5“ . Can I downsize these trailer wheels to a size that conforms more to a passenger towing truck. A standard trailer size wheel (6 lug 15” )or even 20”. Is that a simple swap or does it require some kind of adapter ? Understandably I may loose a little load capacity, not a...
Ive had the TQG in storage, and noticed today theres a slow leak. (it took a few months to get this saturated) Diesel? And where do I begin the fix . Thanks in advance.
Evening , I’m needing to purchase the 3 amp fuse + holder & metal oxide varistor.
(Big thanks to @CallMeColt YouTube video for the instruction and part numbers)
But, I do most all my ordering on Amazon. or even Auto part stores (auto zone, O’Reilly, Napa)
I have not been able to find the exact...
My MEP831a will not turn off . The shut off button will not stop her . I have to disconnect The battery for it to turn off . Other then that , no issues . Any suggestions.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!