Search results

Just got delivery of this truck yesterday lots to learn , first learn about it and would like to find wiring schematic and a good troubleshooting manual and will be painting back to green and just started the build for a Allison 4500RDS swap with wet kit more to follow any help with manuals...

Finally is done after 2 years or so, of course I only work on it twice a month but so far so go , will replace front 385/80/22.5 for a set 425/80/22.5 does look tiny..

After 2 years we are getting closer to road trip to recover a x AirForce flatdeck trailer, rear set up out of a 94 357 Pete 3.73 gears andfront axle out of the Pete as well , need a few things will probably end up with 425/65/22.5 in front , now the loners are 385/65/22.5 and probably super...

Did a good search and could not come up with anything, has rewire one of this units to 120-/240 volt with a aftermarket voltage regulator on like a zig zag configuration...

Who's going to mount Dora FLORIDA this weekend to the rally that has a front bumper to a M915-16 or maybe AMRAP thanks

IS BEING DONE FOR A WHILE , JUST NEEDS SOME MINOR STUFF DONE WHICH WILL DO DOWN IN MIAMI, SO MY FRIEND KEITH TOOK DOWN FROM ZOLFO TO MIAMI...:driver:

Just kidding, i guess being over 30 years old, Bob wanted to make a road trip to see his mother in Lake Placid and also to put some more miles on the M1010 before his convoy in September i belived where he will be traveling from DC to San Diego on a MVPA Convoy, Triple A told him would be 4...

I look and could not find any info so here it goes, need to get the engine start it before i remove it from a truck that we are scrapping and have a few parts for sale, fuel tank is gone and some where down the line the filters where removed, so i have a a remote tank and filters to hook up to...

Its being a while since i posted about the Stuart ,being busy with other projects and being working on the turret slow but hopping we can meet both half's this year... year...

Its being a few months since i posted about our M925A2 but today we work on the exhaust, got it all mark up and spot welded in place, next week will build a support bracket and a shield some black exhaust paint and will do pluming , here are some pictures..

So me and my friend being looking around for a wrecker to use on the yard to lift beds and other things that we are using a fork lift sometimes with difficulties , so being looking around and found this M543A2 about 40 miles from where we going to keep it and used it . So i took a drive to look...

This not just to the M1031 guys as all Chevy CUCV should be the same, so i have had this M1031 for about 2 years is fully loaded with tools that i use on Sundays to do maintenance on some MV's , its all factory except new batteries still 24/12 Volt system , so driving home today as i was...

Well finally got a clean M931A2 from a fellow here in the SS low miles Road ready, what i need help with is, the truck is in Chesapeake VA, i want to come get it the same week of the Aberdeen show, so i need someone in the Richmond are prefer south near I-95 so i can leave the truck there on...

Pick up a M925A2 250 miles north of me have a few questions, do they all come with run flats. What is this valve for it has a slow leak like to replace it.. This looks like a some type of HARMONIC DAMPER is that correct... Will download TM or will look for hard copy soon runs good has 20k...

Well is being about a year and a halve since it broke a rod coming back from ALASKA, even do i had the new engine, machine work done over 6 months ago being busy on other projects, but finally got it all together, is a base 98 6.5 , with a IP 4911, should be picking up the turbo mid week is...

Well john is doing the wiring on the M5 i decided to work on Fred's Ferret is being at least 6 or more years since it ran so the two most known problems with Ferrets is gas tank and brakes , so we clean the tank about a year ago to the best we could with out pulling it out which is big big job...

Well took the track today to a Boys and Girls Scouts camping at a park in Broward County also in attendance Sheriff Office and Coast Guard here are some pictures

Me and my brother being working on the camo for the last few weeks its about 90% done minus the machine gun mount was hopping to take it this weekend to the rally on Central Florida but is not ready so will drive the M1031 here are some pictures

Being kicking it around for a while I am thinking on trying to find a T805 truck, there was one here in Ft Lauderdale just north of me about year ago was ruff , don't see many of them around at least in this country, also maybe the v8 gas engine that comes in it for a project, i remenber a few...