Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
This is a question asked by a friend, and I did try and find info before posting. He states that the compressor is working and he is building air in the air packs but has no air-assist. He didn't find any line leaks, any suggestions what may be happening or where to start looking for a...
Just installed a new vacuum modulator because tranny wasn't shifting into third. Does anyone know the shift points for this tranny? It shifts into third gear now but isn't shifting until about 50 mph, seems high to me. I did some research on the TH400 and some have said the shift points for...
Just blew the back off of my muffler and as I am quickly discovering the confusion of owning a CUCV M1009. Any suggestions or threads out there on the correct exhaust parts? I miss my deuce! Thanks in advance.
I had seen a post regarding changing the wiper arms over to a Dorman part made for a Ford, but unable to locate for the part number. Any help would be appreciated and thanks in advance.
Picking up CUCV in AL in the next ten days and making a run back to New England. Trying to help out fellow member filling the trailer north bound to offset costs. Let me know what you need picked up and I'll deliver to your door, if possible. Earliest requests will set the track back up north.
I need the wire numbers and their locations to install this under the dash on the drivers side. I did have all the schemtics and the TM, but lent them out. Need to move truck in the next two days, no time and patience to look up all the info again. Please, any help, would be greatly appreciated.
I upgraded my turn signal and tail lights, do I need to upgrade the flasher control unit also? If so, part number and vendor information would be great. Thanks!
Just purchased a Deuce, anyway to tell if it is a 1A? I know there was a configuation that was put out that year that had the 5 ton engine with a winch setup. I did look though past posts and visually there was the two engine mount holes at the front right side on the lower block (turbo side)...
Fixing someone's nightmare, electrical is not my strong point. I have manage to get most of it, but there is a two prong circuit breaker, I assume that is supposed to be mounted to the firewall somewhere, which number wires attach to this left to right. I do have the list of numbers, but can't...
Bought six tires from GL thinking they were MRAP to pick up and to find out they are for a LMTV! Is an adapter plate for the M35A2 available for these rims and do these tires fit on a M35A2 (395/85/20)?
Since peashooter is not doing MRAP plates for the M35A2, anyone have suggestions about who has the best quality, 1/2 thick adapter plates for the M35A2s? Want to get my tires on before the snow flies!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!