-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
What transfer case is this?
Hey guys, bought this TC togehter with a th400. The owner said, that this combo is from a K5. It has a 32 spline input shaft and has exact the same lenght like my NP208. It has an electric speed sensor. Unfortunately the tag on the TC is not there. At the beginning, I thought its a NP241, but... -
GM 10.5 14bff 4.56 gears - rust on ring gear - standard or thick gears as replacement?
Hey guys, I bought a GM 10.5 14bff with a detroit locker in it and 4.56 gears, which was in a M1008, for my M1009. Disassambled it and saw rust on one of the teeth :( I want to rebuiuld it, so it doesnt make sense, to run it with rusted gears, so I need to order new gear set (want to stay... -
M1009: 4" lift - draglink geometry correction- dropped pitman / raised steering arm?
M1009: 4" lift - draglink geometry correction- dropped pitman / raised steering arm? Good morning together, my M1009 has a 4" leaf springs in the front without any steering components corrections done. I have installed a dropped pitman (should give theoretically 2" of drop) arm yesterday, to...- McLovin
- Thread
- Replies: 9
- Forum: CUCV Hot Rodding and Modification
-
NP208 - which bushing is the right one for the tail housing? TIMKEN 5208 doesn't fit
Hi folks, I have removed this days the tailhousing from my NP208 to change the rear output shaft seal and bushing. I have ordered TIMKEN 5208 from rock*uto, but it is so, that the bushing is just too smal, it falls thru the hole :-( Bushing, what I got has 48mm inner diameter and 50,75mm... -
NP208 - can't get the rear housing off
Hey guys, my NP208 is here on my table and I would like to change the rear output seal and bushing ( TIMKEN 5208 ). Seal was leaking and the bushing seems to have wear marks. Outputshaft has no radial or axial play. Anyway, removed the 4 bolts, which hold the tail housing, but can't get it... -
Again a newbie
Hey guys, my name is Eduard, 41, from Germany, a big fan of the US CUCV's and restore my M1009 since almost 3 years and try to manage the rest of the time with my kids and wife 8) Here since 2012 as a 'silent reader', love this forum and now wanted just to introduce me :mrgreen: Thank you and...- McLovin
- Thread
- Replies: 12
- Forum: Requirements For New Members
-
M1009: Glow plug module: wait light is on, but glow plug relay doesn't energyze
Hey guys, I have the following situation with the glow plug system: In my garage it is around plus 10 celsius degree. 1) switch on the ignition 2) PNK/BLK-39B delivers 12V on the glow plug relay, wait light is on, but LT BLU-505 doesn't deliver ground to the glow plug relay. This leads into a...