• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. D

    filter

    Can someone please provide the trans spin on filter number for an M923
  2. D

    Cummins 855 spin on oil filter number

    I'm sure somewhere on here this has been covered but I couldn't find it in the search. When using the Baldwin OB-1368 spin on oil filter upgrade adapter whats the correct spin on oil filter number ? It's on a 85 M923 with the 855 Cummins
  3. D

    lmtv air lines

    anyone know where to get the airlines that run from the brake chamber to the valve on an lmtv trailer? they have that oddball right angle fitting on them
  4. D

    can you identify this wheel?

    Can anyone identify the wheel in this picture and will it fit a 5 ton?
  5. D

    Barstow

    Anyone picked up in Barstow lately? Do they rush you out or can you put batteries in and check fluids? Is there anyplace right outside Barstow to work on minor repairs? Will they let you tow a truck out with a pickup? Any info would be helpful. I guess I'm asking are they cool or not? Also any...
  6. D

    S280 Shelter

    Anyone know what size and type of cable is acceptable to secure an s280 shelter in the rear of a 5 ton? I have the correct cable eye hook set-up in the truck bed that was originally used.
  7. D

    water temp gauge

    Wheres the best spot to put the probe for a mechanical water temp gauge on an 855 cummins in a 923? Thx Doc
  8. D

    Oil pressure gauge

    855 Cummins in an '85 923. Oil pressure gauge is at rest at zero with the engine off. Start the truck it pins high. Gauge or sender? Any part numbers or napa numbers on the gauge or sender? Where can you tap in for a mechanical gauge? The sender I believe is on the driver side correct? Thanks Doc
  9. D

    Trailer paperwork

    Has anyone bought a trailer lately (1101 or similar). The paperwork provided by GP is without a notary stamp and Arizona's refusing to process a change in ownership. Anyone in Arizona or anywhere else experienced this? Doc
  10. D

    923 fuel tank drain plug size

    I put a second fuel tank on my 923 in place of the large tool box. Fits very nice. I'm going to run a crossover line through 1" square tube to protect it and a ball valve on each tank. I pulled the drain plug out and low and behold it looks like 3/8" pipe thread but its not. It's a hair smaller...
  11. D

    855 Water Filter

    Anybody installed a water treatment/filter on their 923 with an 855 ? There's a u-tube video with an install and the guy plumbed it in the with T's to the heater feed and return lines. Seems just tapping in somewhere else would be easier or just putting it inline in either the feed or return...
  12. D

    Kansas City before next Tuesday

    Anybody going to be in Kansas City before next Tuesday 9-29-15 can take a quick look at something for me?
  13. D

    light ground

    without referring me everywhere else does anyone know where the low air/e brake light bulbs are picking up their ground on a 931?
  14. D

    Buzzer/Lights Control Module

    I have a 90 M931A2 was a rebuild. There are 2 modules that I'm guessing control the lights and buzzer for the parking brake and low air. There is (1) on the driver side kick panel right by the fresh air door with a 3 prong plug. There is a second on the inside firewall driver side just to the...
  15. D

    Hill in Utah

    Anyone know if Hill in Utah will let you drive a running/road worthy truck off the base or does it need towed/trailered ?
  16. D

    LOUD air leak under dash M931A2

    I have a 1990 931A2 that was a rebuild. I've found bad grounds, air lines crossed on the transfer case and some plugs not plugged in. BUT I have a loud air leak under the dash that starts at higher rpm's and gets very loud when the turbo spools in. It appears to be under the driver side and I...
  17. D

    Fort Sill Ok

    Anyone know if you can just hook up a trailer and go off Ft Sill or does it have to be loaded on another trailer?
  18. D

    Fort Hood inspection

    Anybody near Fort Hood willing to do an inspection?
  19. D

    Phoenix Az previews

    I'm in Phoenix 4-5 days a week if you need a preview on something.
  20. D

    Mississippi pick-up 7 tires to Arizona or close to

    I need (7) 14x20 tires mounted on rims picked up it Hattiesburg Mississippi and delivered to Arizona (or close). Time isn't really a big deal. Load and unload on both ends. Let me know asap as I'm trying to find a common carrier also. Thanks Doc :tigger:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks