Search results

I have had a CTIS system that has worked flawlessly for 5+ years. Now the controller flashes like normal but I NEVER hear the relay at the passenger footwell check the air. Is there a voltage check I can do at the relay or is the someone in central Texas that has a relay I can buy / borrow to...

I'm looking to swap my tires from my current Michelin 14Rx20s to Michelin 395s. My 14s are in great condition with some side cracks but minimal at that and I have all the 395s but what I don't have is time. I am putting a feeler out to anyone that wants all 7 of the 14s to see if someone wants...

I have been searching and collecting a list of the part numbers that I need to work on and I have come up blank on one NSN. I am looking for the duckbills that are on the relief valves. These are the part on the CTIS system that lets the air our of the system but doesn't let water / dust into...

I am looking at a new set of tires and want to know if the Michelin 16xR20 tires fit all around on a M923A2. By the math of it I shouldn't have any problem but wanted to know if anyone here has run the larger tire size on their rig. thanks, Bryan

Well, I am going to be home for a couple of weeks so I was checking if there is anything going on in the greater Brazos Valley and or Houston area? I have managed to miss all the past ones! Thanks, Bryan

Was able to finish up the receiver hitch so we can pull civi trailers. We no can head out with the RV next weekend!! :mrgreen: Both the receiver and the pintle are fully functional!

Well, I finally got my pioneer tool kit installed on the M923A2 today!! I think it looks great and I had minimal customizing of the tools to fit, really just had to shorten the shovel by about two inches and that was all.

Does anyone know where to get the strapping to hold down the jerry can and also the tool strapping on the pioneer tool kit. All I can find is bulk webbing online. Thanks Bryan

I wasn't able to find a listing for a rebuild kit for the windshield washer control valve and mine seems to leak. Randomly the washer nozzles will dribble water out without pushing the button. They squirt great when the button is pushed but like I said just randomly dribble. I know they are...

Other than the obvious of taking out the front "propeller" drive shaft... is there a way to rebuild the slip joint. I noticed today that upon coasting to a light or just letting off the fuel pedal for a sec there is a thumping sound. I found out that the front drive shaft is a little loose at...

I was curious about the batter box in my M923A2. Are they fully sealed from water and if so is there any PM that needs to be done? I searched the TMs and found how to replace it and such but no information on if it is sealed for water penetration. Thanks, Bryan

I searched around a bit and found I can replace the entire marker / clearance lights to LED but can you change just the bulb to LED? I have access to cheap LED 24v bulbs and was just curious if this was even an option. Bryan

When I first got my 923. The tach didn't work... I noticed it was disconnected on the engine side so I connected that back up. Still didn't work so I thought the cable was broken so I disconnected it from behind the tach and the cable was spinning fine. That is when I noticed the tach cable...

I officially just ordered three new folding high back seats with arm rests and headrests! Going to be nice on those long road trips!! Can't wait to get them installed when they arrive. Bryan

Pick have been searching for what all is installed in the pioneer tool rack that slides under the bed of a M923A2. Does anyone have pictures do the unit and what all goes on it? Thanks, Bryan

My wife bought me a 1990 M923A2 with 1200 miles on it... Such a fun truck!!

I was able to swap out the fuel filters and then we adjusted the fuel rates on the truck.... Stock they were so low the turbo never spooled up properly!!! No we are full open on full fuel and full open on low fuel. My governor went up a couple of clicks which brings the high rpms up to 2400...

Drove to a friends auto shop and he had an old car out back that was just "begging" to be dealt with!!!

It is a little delayed but two months ago we drove out from College Station TX to Fort Bliss in El Paso TX to pick up our new truck. My wife bought a M923A2 for my anniversary present!! Checked all the fluids and did a quick service on all the service points and then hit the road, over 700...