Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Just about done with the body restoration, ill post some pictures soon.
Survey of engine- some pitting on cylinder of otherwise good block.
how bad is too bad? what happens if you run something like this?
The other picture- the Mutt back on all fours for the first time in 2 years.
I am servicing my 3 speed and transfer in the M38.
What gear oil is everyone' favorite? I have used sae80-90 over the years, and have run some purple synthetic in the m38a1.
advise?
My dad and I were working on his M37, it was running well, stopped like it ran out of gas.
he gassed it back up, then it wouldn't start.
still thinking fuel, replaced the fuel pump with a 24v pump, set the bowl height, and generally played around with fuel delivery.
Put new points and...
Starting into this A2.
Good points are engine and driveline
Bad point is the body. Mid cross member is all but gone. floors gone. front crossmember repairable.
http://s1304.photobucket.com/user/dougimes/media/m151%20restoration/182_zpsgczikbke.jpg.html?sort=3&o=8
Is the transfer case for the WC 62 different than that of the WC 51. 1 1/2 ton vs the 3/4 ton?
Particularly, is the gear ratio the same, are both 2 speed?
Dad and I ran the M715 for the Charlotte to GA portion of the cross country convoy. Had a great time with a bunch of guys who's sense of adventure exceeds good judgment.
The truck ran as Jeep would like to advertise, comfortable and quiet, except I am still fighting a coolant lose...
I took the m715 on a shake down run of 60 miles or so getting ready for my leg of the Cross Country Convoy.
The only issue I see, after the truck is all warmed up and has been running a while, oil pressure stabilizes while at speed, I show about 10 to 15 PSI of oil pressure. At idle its...
I have a hard to find coolant leak, losing a gallon every 50 miles.
my observations.
only happens while operating.
only visible liquid is down wind (while driving) of the overflow tube. coating the right axle and leaf springs. no other trace above that.
system holds pressure. After...
I am going to roll my M715 for a part of a leg of the cross country convoy in September. I am picking up the group in Charlotte and rolling with them to GA.
Making a truck ready for long day road miles has been an interesting exercise. You look at things differently. I replaced the single...
Gene Imes, (my dad) sent his M715 down from Wisconsin for me to take care of . He has been using it as a farm truck, feeding animals etc. He recently painted it and decommissioned it, added bows and seats etc.
Questions for the group.
what should I absolutely do before I run it much...
This one has me stumped for the moment.
Engine runs rough at idle, chugging, very un-even. Smoke out the exhaust that smells like unburned gas.
It was running fine, has been for years. I made a 10 mile back and forth run to the gas station, by the time I got back, I had the above...
Found this m37 at a salvage yard in Chippewa Falls WI. Driveable and intact. Interesting to see on in original paint.
Anyone interested I can put you in touch
http://uk.news.yahoo.com/south-korea-vows-fast-response-north-u-deploys-042219176.html
Recoiless still depolyed in S Korea
Hard to improve on something so fundamentally corrects
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!