Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I picked up a 25,000 lb pintle, air brake flatbed this weekend. I had to remove the gladhands and cap the lines for the fifth wheel trailer hook up. I crawled under the truck to look for shut off valves and did not find any. The rear air lines have shut offs and they worked perfectly. I was...
I recently purchased a Saginaw Products Corp. AAR Cadillac Transporter Trailer. Do we have a tm on this unit. I plan to modify it to haul my highboy sprayer. No green iron will be harmed. I just plan to built a center section that will lift and transport the sprayer. I will post a picture...
I had to throw my brother a bone. He has been hauling all of the grain this year and the 915a1 was starting to beat him up.
He picked up an air ride seat at the junk yard and I installed it.
It was mostly straight forward. I tapped the air line that...
The heater motor in my 915a1 died. I pulled it and it has about 3/4 inch of in and out play in the motor. I recently changed the blower in a piece of farm equipment we have. It looked like the same motor. I pulled the farm one and they are exactly the same. Now if I can find my old paperwork...
About Thanksgiving time the alternator on my deuce decided to give up. I took it to be rebuilt. I called twice and the rebuilder had not got around to it yet. At the 4 week point I walked in the shop and saw my alternator sitting right where I had left it. I told them I wanted it back and...
I recently purchased a model 750 swench off of ebay. I really like it. It makes breaking lug nuts loose easy. I also like not throwing my back out when 6 foot of cheater lets go all at once. I plan to use it to put the lugs back on. The swench manual says to count the number of times the...
Harvest is in full swing and so are the military trucks. We are hauling grain with the 915a1s and using a deuce for a contact maintenance truck. Dad runs the combine. My brother runs the weigh wagon/ grain cart. I drive the 2 915a1s. We unload on the go so the combine never stops moving...
I have been working on my m915a1 fleet for about 2 week straight. I had one come home with a stuck brake and broken axle. That truck got the most attention first. Now that it is up and running I got to work on the better truck. I replaced a air line for the trailer hook up. I put black...
I just pulled the axles on my new 915a1. One wheel is locked up and won't move. When I got the axle out of that side it was broken. I can easily get a new one at the junk yard. What kind of house keeping should I do in the center section?
Does anyone know what feet I should use to tow bar a 915a1? Also is a med bar big enough? I will be looking to purchase these parts in the near future.
I put a back up light on the 817 today. I removed the 90 deg. fitting from the reverse sprag air line. I replaced it with a t from an air compressor. I then put a straight 1/4 by 3/8 compression fitting in one end. I installed a SL-4, Bendix #228600, air brake switch in the other end. I...
I have had my deuce for about 5 months. It has always started instantly when you push the button. After a recent road trip I noticed it getting harder to start. I checked the valve adjustment, a few were loose so I reset them. I checked the fuel shut down by pulling the cover on the side of...
I recovered my deuce from Camp Dodge today. They have fixed their security problems from this spring! I got there at 11 and was on the road by 12. Truck started and ran great. I have a mystery fluid on passenger front tire. I suspect wheel cylinder. They put padlocks on the tool box so I...
I just purchase a lube trailer, gasser, from sparta. I plan to pick it up with my deuce. Anything I should know about this trailer as far as towing. Also does anyone know where to find the tm on this. I looked and did not find any in search.
I will post pics as soon as it is home.
I installed one of the air o matic kits from BrianrBull this weekend. It took me about 7 hours. It could be done faster if you wanted to do some of it again later. I took a bunch of pictures, and here they are. This first batch is just the deuce with the wheels off. There is also a picture...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!