Search results

My m35A3 quit 1 year ago what I found was a feul tank check valve plugged. Easy enough to clean. But also replaced fuel and return lines . It ran good all last summer. It started and ran good when I got it out this spring.... once. Then would not start. Here is the repair in short. I...

It's been a long time since I've posted anything but here is my latest project, it took about 3 weeks .

I have been reading the posts and cant seem to figure out for sure if I can replace my th 400 for a th700r4 I need to keep the transfer case (np 205 I believe) due to the pto for the generator coming off of it. I have a chance to buy a 700r4 very low mileage I know I will need a torque...

I have a problem with my m998 that may or may no be a problem. when I got the 998 it had no headlights so of course I ordered a nos set of 28 volt Wagner's after installing Corectly they both turned black inside and failed. checked voltage 24-26 volts.got 2 more light 1failed instantly.the...

I just got my hmmwv 998 from gov planet (it took 3 months) and is missing some parts ...throttle cable couple sensors power steering pump is broken and the item I need most is the smart start box (missing) 6500391 old part number is 12479192 I just wanted to know if anyone has used parts...

Made a pass on the 1/8 mile drag strip with the A3 on the 4th of July. Gota love America! Any guesses on the ET.?

I am in need of 2 axle spindle seals for an a3 with ctis(QUAD RING) pn 12448547 does anyone know where I could get them?

I think I have a problem with my m35A3 it seems the compressor is running all the time.releasing air a lot while driving. It dosent seem to be normal. any sugestions on how to fix or check out?

my tacometer on the A3 quit today checked wire plug in and it is charging an Ideas???

turns out there is a beer bottle opener on the other side of the paint can opener

My ctis controller on my A3 is bad so I was wondering if anyone has figured out a way to bypas it. the way I see the schematic if you had a psi gauge on dash for the front and rear wheels and a way to turn pump on and a way to open valve to lower psi manually you could bypass controller...

I have only had it home for a couple weeks. I left it in the front yard and this is what happend.:razz: MERRY CHRISTMAS

Can anyone tell me if there is a diagram of the air system on an a3 deuce? I have done a serch and dowmloaded the TM and cant find

Is there any way to serch JUST the classifid adds I know there was in the old classifieds. if so HOW?

I have m1009s for 2 years and have been looking for a duece ever since. I finaly won (BOUGHT) a m35a3 and havent even givin the privliage of picking it up yet (although my money disapered from my account quite quickly) now ever since I "won" it I have been serching for a 5 ton. In the boat...

OK Ive read the posts and searched the posts (for a minute or two) and my Question is has anyone rebuilt there own cucv injection pump? I was all in for buying a rebuilt one but now both of mine are being STUPID. Right now a duce is looking real good (trade?)

Can anyone tell me what model rear end my M1009 has? I know its a gm 10 bolt with a eaton gov loc but I need to order new berrings and such. I took a drive around lake Michigan (1200 miles worth) and at the end I noticed a growl in the rear end so I took the cover off all looks good but there is...

Does anyone know what rpm the 1009 should be running at a givin speed Say 60mph? Im checking for trans slipage. it has std 10.5 31x15 tires and std gears 308. and if it is slipping IM geusing it would be torque converter.

I know I am suposed to post this in classified but I am in a hurry and have had no luck there What I am in need of is a tailgate regulator and crank for a 1009 It is going into my civy blazer so I can sell it to help pay for this mv adiction I seem to have. I have an electric regulator...

I'm looking for injectors for my 96 m1009 can anyone tell me if they are fine or corse thread? and best place to buy. also I see the injection pumps for sale on ebay do we think they would hold up to the low sulfer fuels? one last thing why does my alt belt squeel anytime the glow plugs...