• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. 155mm

    Choctaw H140 - no ignition arc

    You can turn it on with the top off, but no air will go around the heat exchanger if you try to start heater.
  2. 155mm

    Choctaw H140 - no ignition arc

    If I remember correctly, there is a burner chamber fan that forces air into the burner, remove top and inspect fan to burner duct
  3. 155mm

    Choctaw H140 - no ignition arc

    If you are the only operator, run it forever bypassed. Heat is the important part
  4. 155mm

    Choctaw H140 - no ignition arc

    Yes, that is the only tm, did you attempt to clean and adjust? Adjustment is on page 0028 00-5 just dont forget its bypassed, if its only you operating it, i have no issues running it bypassed
  5. 155mm

    Choctaw H140 - no ignition arc

    If its bypassed, be overly overly cautious about keeping he box sealed up, if he box isnt sealed up, the heat exchanger can overheat and blow the end out, then you get flames and a big fan pushing the flames I have one in Montana that has ran for 3 winters now bypassed, but the heater never...
  6. 155mm

    Choctaw H140 - no ignition arc

    Clean it out, it get filled up with dust, then readjust, i think there is a procedure in the tm
  7. 155mm

    Choctaw H140 - no ignition arc

    If you by accident bypass that switch, make darn sure the box is sealed up as much as possible other than minimal open doors for inspection
  8. 155mm

    Choctaw H140 - no ignition arc

    Look at atmosphere pressure switch
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks