Search results

It was on there, but did not sell for $5000, no bids

It is on a popular bidding site right now.

It's actually fairly comfortable, I did use a good top grade foam for mine, that may be the difference.

Pics of the mule with the proper seat I got this week.

The Mule got 4 new shoes this weekend! I installed 4 new tires and tubes I purchased from Summit Racing( they were Coker Tire mfg.), Every old tube that I removed had at least 1 patch, but not as difficult a job as I expected.

Thanks, I plan to go back with stock tires with tubes, at present the tires have about 12 psi.

Understood, no offence taken, and advice is always welcome. That short stint in the video will probably be the only time it will hit top speed, 99.9% of my use will be low range as well.

Thanks, I actually sourced the pedals and everything else for the basket from John Emery, the foot basket itself came from Eastern Surplus. The release bearing carrier was rusted to the input shaft bearing retainer, after all was cleaned and lubed, all was well. This mule and the other the...

Video of this afternoons test drive, enjoy! https://www.youtube.com/watch?v=sGDT7kSfkX8

It has been a while sine I updated this thread, been busy at work as well as my grading business on the side, but work has been progressing on the mule. At this point, it is complete and driveable, I was able to locate(with some help) and purchase all the missing parts. A special thanks to...

Thanks Charles, It was good talking to you the other evening.

Understood, I actually pulled the engine to fix a stuck throw out bearing and replace a leaking rear main seal, I am going to take this opportunity to give the engine a good cleaning, both inside and out. I also plan to replace the clutch disk as it was really rusted.

Nothing much to report, I received 2 boxes of parts from John Emery on Thursday and finished changing all the gear case oils. I did find one small problem, it appears I am losing engine oil through the rear main seal, it is gathering in the bell housing and running out the drain which I left...

It may be coming home to join this one in the next couple weeks.

Success!! It runs!!!! After 2 evenings of cleaning and freeing up a stuck engine, changing plugs, cleaning the magneto and re-timing it, changing oil and filter I finally got the engine to spin over. It had spark, had compression, and I got a few burbles and 1 ten second burst of running...

Today I managed to remove the completely locked up pull starter assmy, take it apart and thoroughly clean and free it up, Just in case I had to go back into it, I filled it up with a light grade of lubrication oil. I also cleaned and lubed the pulley in the 90 deg box for the pull start as...

Yeah, that roll bar was the first thing to go.

New to me 1969 M274A5 Brunswick mule Just when I thought I was selling off the MVs and kind of getting "out" of the hobby, A coworker found a M274 mule on a local "for sale" site, and I got a chance to go look at it this evening, needless to say the price was right so it came home with me...